Skip to Main Content »

VEX Robotics
Ships From:

You're currently on:

VEX High Strength Gear Kit

 VEX High Strength Gear Kit

Hover to View, Click to Zoom

  • VEX High Strength Gear Kit
  • Packaging

High Strength Gear Kit

P/N: 276-2250

Toughen Up!

Build mechanisms capable of withstanding higher stresses than ever before. Lift heavier loads, and survive bigger impacts with the High Strength Gear Kit.

  • High strength gears mate with all VEX spur gears.
  • Double-thick face width provides added tooth strength.
  • Metal Square Hole Inserts prevent axles from "stripping".
  • Use metal pinions for high strength where it counts.
  • Use the round-hole inserts to build free spinning idler gears.
  • Build gearboxes that resist high shock-loads.
  • Bolt Gears together for added strength.

Be the first to review this product

$29.99

In Stock

Add Items to Cart
OR

You may also be interested in the following product(s)

Product Name P/N: Availability Price Qty
Metal 12-Tooth Pinion (12-pack) 276-2251
In stock.
$19.99

Overview

This kit provides several new gears with features to handle higher loads. Each of these gears has a wider face width; this means each tooth is wider so applied loads will be spread over a larger area. The 12-tooth High Strength Gear is molded out of powdered metal. The 36-tooth and 60-tooth Gears have powdered metal inserts. These metallic components will protect the gear from high loads applied by a VEX axle.

Technical Specifications

Kit Contents
  • (4)High Strength 12-tooth Gear (0.58 inch diameter)
  • (4)High Strength 36-tooth Gear (1.58 inch diameter)
  • (4)High Strength 60-tooth Gear (2.58 inch diameter)
  • (16)High Strength Square Gear Insert
  • (16)Free Spinning Gear Insert
  • (1)Inventor's Guide Insert
Downloads & Docs Inventor's Guide - High Strength Gears
Compatibility High strength gears mate with all VEX spur gears.
All VEX Square Shafts 0.125" (3.2mm)
Material Type
  • Metal:12-tooth Ggear, Square Gear Insert
  • Delrin:36-tooth Gear, 60-tooth Gears, Free Spinning Insert
Specifications
  • Gear Type:Spur
  • Diametral Pitch:24
  • Pressure Angle:20 degrees
  • Face Width:0.500" (12.7mm)
 

My Cart

You have no items in your shopping cart.

NAVIGATION

Education Competition Design
Motion Structure Power
Sensors Logic Control

Newsletter

Newsletter