You have no items in your shopping cart.
| Product Name | P/N: | Availability | Price | Qty |
|---|---|---|---|---|
| 24V Victor 883SC + 24V Fan | VICTOR-SPIN-24/24 |
In stock
|
$169.95
|
|
| 24V Thor 883SC + 24V Fan | THOR-SPIN-24/24 |
Out of stock
|
$219.95
|
You may also be interested in the following product(s)
| Product Name | P/N: | Availability | Price | Qty |
|---|---|---|---|---|
| Replacement Victor Fans (3-choices) |
In stock.
|
|||
| PWM Signal Driver | PWM-DRIVER |
In stock.
|
$14.95
|
Selection Chart
| Victor 883SC | Thor 883SC | |
| Nominal Voltage | 24V | 24V |
| Min/Max Voltage* | 6-30V | 6-30V |
| Continuous Current | 90A | 150A |
| Surge Current (2 sec) | 100A | 200A |
| Surge Current (1 sec) | 200A | 300A |
| PWM Output Chop Rate | 120 Hz | 120 Hz |
| Minimum Throttle | 3% | 3% |
* Min/Max voltage does not apply to the fan.
- 24V Rotron:Voltage Range: 16V to 30V
How it Works
2. User controlled variable forward speed. Spinning at a variable rate is important if your robot is out of balance or unstable at full speed.
3. The final and most important benefit is a special ramp down feature that takes over if you lose your control signal. When the signal is lost, or you turn off your transmitter, the controller softly ramps the dynamic braking from 0% to 100% over a ten second time period, then remains at 100% braking indefinitely (or until the control signal returns). This allows designers to make their inertia devices or spin‑bots spin faster and more freely than previously possible. The automatic proportional braking feature enables the robot to meet most spin down time rules during inspection and competition.
4. The Victor/Thor SC's fail-safe even works if input power is lost. Regeneration is used to 'shunt brake' the motor.
Technical Specifications
| Battery In | Power Connector: 6-32 Screw Terminals Do not reverse the input polarity on a Victor. Doing this will permanently damage the unit and void the warranty. |
| Inputs |
|
| Outputs | Power one motor with variable speed forward, reverse, or off. Our Speed Controllers can NOT be used with Brushless motors. |
| Specification | Use a PWM Signal Driver to ensure the signal from your receiver is Victor compatible. Warning - Applying more than 5V to a PWM Signal Driver will damage it. Do not use a PWM Signal Driver with any VEX Microcontrollers, VEXpro, Signal Splitters, or any receivers or mixers that supply more than 5V to the PWM Signal Driver as damage will occur. |
| Weight | 0.25 lbs. |
