 |
VEX Robotics Transmitter and Receiver Kit
VEX Robotics Transmitter and Receiver Pair
- Provides the link between driver and robot.
- 6-Channels (4-analog, 2-digital)
- 75MHz, multi-frequency via RF crystals (run multiple robots at the same time)
- Multi-configuration with digital trim and channel mixing.
- Includes robot tether port.
For more information consult the "control" section of the VEX Inventors Guide
Patent(s) Pending
Same Day Shipping by 3:00pm CST (Mon-Fri)
|
Transmitter & Receiver Kit
|
This kit includes a VEX 75MHz Transmitter and Receiver pair. Provides the radio control link which allows human operators direct control of a VEX robot.
Transmitter is a 6-channel (4-analog, 2-digital) hobby grade FM unit, custom configured for VEX.
More Info
|
| P/N: 276-2153 |
Transmitter and Receiver Kit |
$129.99 ea |
In Stock |
 |
|
|
| VEX Robotics |
Technical Info |
| Control Frequency |
Channel 89, 75.970 MHz |
| Tx Battery Type |
8 AA batteries (not included) or
VEX
Robotics Power Pack |
| Number of Channels |
6 - (4 Analog and 2 Digital) |
| Analog Channels |
2 potentiometers, each with an X and Y axis |
| Digital Channels |
4 momentary switches (located on the backside) |
| Tx Size |
8 x 8 x 2.5 inches approx. |
| Tx Weight |
1.63 lbs. approx. |
| Rx Weight |
0.05 lbs. approx. |
| Quantity |
Description |
| 1 |
Transmitter unit |
| 1 |
Transmitter frequency module - channel 89 |
| 1 |
RF receiver module |
| 1 |
Receiver crystal - channel 89 |
| 1 |
Receiver antenna sleeve |
| 1 |
Receiver antenna sleeve holder |
| 5 |
Keps nuts |
| 5 |
8-32 x 3/8" Screws |
| 1 |
Inventor's Guide Insert |
| 1 |
9" RJ-10 cable, interconnect between the RF receiver module and VEX Micro
Controller |
|
 |
