You're currently on:

Motion


Motion

Motion Accessories

The Motion Subsystem comprises all the components in the VEX Robotics Design System which make a robot move. These components are critical to every robot. The Motion Subsystem is tightly integrated with the components of the Structure Subsystem in almost all robot designs. In the VEX Robotics Design System the motion components are all easily integrated together. This makes it simple to create very complex systems using the basic motion building blocks.


66 Item(s) Show per page
View as: List  Photos  Sort by Set Descending Direction
2-Wire Motor 393

The 2 Wire Motor 393 provides 60% more output power than the standard motor, which allows for more powerful mechanisms and drive bases.

  • Strong, steel internal gears.
  • Can be configured into a "high speed" version.

P/N: 276-2177
$14.99
In stock
2-Wire Motor 393 w/ Motor Controller 29

A convenient bundle that includes (1) 2-Wire Motor 393 and (1) Motor Controller 29.

P/N: 276-1668
$24.98
In stock
393 Motor Turbo Gear Set (4-pack)

Use the Turbo Gear Set to push your motors to the fastest speeds ever seen in VEX robotics. This gear pack replaces the gears inside a 2-Wire Motor 393 for high-RPM, low-torque applications.

  • Only for 2-Wire Motor 393
  • 240 RPM output speed is 140% faster than standard gearing
  • Use with external gearing or large wheels for even more speed

P/N: 276-3527
$12.99
In stock
Motor 393 Refurb Kit

Lose your gears? This convenient replacement gear pack for the 2 Wire Motor 393 will get you going again without having to purchase a new motor. Includes one full set of gears.

  • Only for the 2 Wire Motor 393
  • (1) of each internal cluster gear
  • (1) set of replacement case assembly screws

P/N: 276-2487
$4.99
In stock
Motor Controller 29

The Motor Controller 29 goes between a 3-wire Motor Port on a VEX Microcontroller and a VEX 2-Wire Motor. It uses a standard PWM signal to provide motor control.

P/N: 276-2193
$9.99
In stock
3-Wire Servo

Servo motors are a type of motor that can be directed to turn to face a specific direction, rather than just spin forward or backward.

  • Add pan and tilt to a camera
  • 100 degrees of rotation
  • Do exact positioning

P/N: 276-2162
$19.99
In stock
Gear Kit

This kit contains four sizes of VEX Spur Gears (12-, 36-, 60-, and 84-tooth gears). The 60- and 84-tooth gears have extra mounting holes.

  • Create robot transmissions, gearboxes, and gear reductions.
  • Vary the speed or torque of robot motion systems.
  • Increase design possibilities for your robots.

P/N: 276-2169
$12.99
In stock
Metal 12-Tooth Pinion (12-pack)

These metal 12-tooth spur gears are great for applications under high shock load or requiring high strength.

  • Double-thick face.
  • All metal gear for high strength.
  • Mates with standard VEX gears.

P/N: 276-2251
$19.99
In stock
High Strength Gear Kit

Build mechanisms capable of withstanding higher stresses than ever before. Lift heavier loads, and survive bigger impacts with the High Strength Gears.

  • Double-thick face.
  • Metal Square Hole.
  • Metal pinions for high strength.

P/N: 276-2250
$29.99
In stock
High Strength 84-Tooth Gear (4-Pack)

Build mechanisms capable of achieving higher torque or speed than ever before - lift heavier loads and survive bigger impacts with the additional gear ratio options provided by the largest high strength gear available.

  • Works with the VEX High Strength Gear Kit or any VEX spur gear
  • Double-thick face width and ribbing provide added strength
  • Metal Square Hole Inserts prevent axles from "stripping"

P/N: 276-3438
$12.99
In stock
Advanced Gear Kit

This kit provides several options for advanced motion. These parts allow advanced mechanical VEX designers to create new ingenious mechanisms.

  • Create Linear Motion with the Rack Gears.
  • Transfer Motion 90 degrees with Bevel Gears.
  • Add a Differential to your Drivetrain.
  • Get a high-reduction with the Worm Gears.

P/N: 276-2184
$19.99
In stock
Rack Gear (16-pack)

Rack gears can be used to turn rotary motion into linear motion.

  • Use any VEX spur gear as a pinion to drive these rack gears.
  • Stack multiple rack gears back to back for longer motions.
  • Combine these with a VEX linear slide and Rack Gear Bracket (sold separately) to create a simple linear actuator.
  • Each Rack Gear includes (3) 6-32 threaded inserts on their back face. Mount these similar to VEX motors or servos with 6-32 screws.

P/N: 276-1957
$19.99
In stock
Bevel Gearbox Bracket (2-pack)

Use additional standard VEX Motion Products (not included) to utilize this bracket with VEX Bevel Gears. There are 2 VEX Bevel Gear Brackets included in this kit.

  • Designed for the VEX Bevel Gears.
  • Metal only. Gears and bearings not included.
  • Sold in a pack of 2 brackets.

P/N: 275-1189
$9.99
In stock
Worm Gearbox Bracket (2-pack)

This Bracket is designed with the VEX Worm Gear. This is the simplest way to mount and utilize the worm gears.

  • Designed for the VEX Worm Gears.
  • Metal only. Gears not included.
  • Sold in a pack of 2 brackets.

P/N: 275-1187
$12.99
In stock
Rack Gearbox Bracket (2-pack)

Uses the pinion gear to rotate the rack gear which will in turn slide linearly using the VEX Linear Slide Pack.

  • Create linear motion.
  • Designed for the Rack Gear.
  • Sold in a pack of two brackets.

P/N: 275-1188
$9.99
In stock
High Strength Sprocket & Chain Kit

These reinforced sprockets and chain can transmit higher loads over long distances. Withstand higher stresses and lift heavier loads.

  • High Strength Design - up to 50 lbs.
  • 12 Sprockets in 5 Sizes.
  • 54" of Chain Links.

P/N: 276-2252
$39.99
In stock
High Strength Sprocket Packs (6-choices)

These reinforced sprockets and chain can transmit higher loads over long distances. Use this kit to withstand higher stresses and lift heavier loads. Useful for any application where regular chain just won't cut it.

  • High Strength Design - lift up to 50 lbs
  • 12 Sprockets in 5 Sizes
  • 54" of Chain Links

Starting at: $12.99
In stock
Additional High Strength Chain

This kit provides additional high strength chain that works with the VEX High Strength Sprocket & Chain Kit.

  • (140) High Strength Chain Links
  • (20) Attachment Links
  • High Strength Design - up to 50 lbs.

P/N: 276-2172
$24.99
In stock
Sprocket & Chain Kit

The six different sprocket sizes allow for a variety of ratios. Great for any application where you need to transfer power across long distances.

  • Transfers power effectively over long distances.
  • Designed to carry moderate loads.
  • Every section of chain is a master link.
  • (14) Sprockets in (5) Sizes.

P/N: 276-2166
$29.99
In stock
Additional Chain

Great for any application where you need to transfer power across long distances.

  • 48 inches of Chain.
  • (326) Chain Links
  • Every link can act as a master link

P/N: 276-2182
$14.95
In stock
Tank Tread Kit

Use this tank tread to build robot tracks which can overcome tough terrain, or build a conveyor belt for scooping up objects.

  • Climb over obstacles and traverse tough terrain.
  • Drive through sandy or soft spongy surfaces.
  • Can be used for a robot conveyor belt.
  • Every section is a master link, create treads of any length.

P/N: 276-2168
$29.99
In stock
Tank Tread Upgrade Kit

These upgrade links should be useful to designers wishing to create more advanced mechanisms utilizing the tank tread.

  • Different Tread-Links Increase Functionality.
  • Get High-Traction on Smooth Surfaces.
  • Compatible with Tank Tread Kit, High Strength Chain & Sprockets.

P/N: 276-2214
$24.99
In stock
Wheel Kit

VEX has the right tire for any terrain. Three different size wheel diameters are available each with a different tread type.

P/N: 276-2164
$29.99
In stock
2.75" Wheel (4-pack)

A pack of (4) of the VEX 2.75" diameter Wheels. These wheels include a smooth grippy tire which has high traction on smooth surfaces.

  • High Traction rounded tread.
  • Removing the tread makes a low-friction wheel.

P/N: 276-1496
$9.99
In stock
2.75" Omni Directional Wheel - Double Roller (2-pack)

Omni-Directional wheels roll forward like normal wheels, but slide sideways with almost no friction (no skidding during turns). Use these wheels to make your robot turn smoothly or build a holonomic drivetrain.

  • 2.75" diameter
  • 14 rollers per wheel

P/N: 276-1902
$19.99
Out of stock
2.75" Omni Directional Wheel (2-pack)

Omni-Directional wheels roll forward like normal, but slide sideways with almost no friction. Use these wheels to make your robot turn smoothly.

  • 2.75" Omni Wheels roll sideways with very little friction.
  • Minimize skidding during turns.
  • Build a holonomic drive.

Discontinued. Available while supplies last. We recommend the 2.75" Omni Directional Wheel - Double Roller as a replacement option.

P/N: 276-2165
$19.99
In stock
3.25" Traction Wheel (4-Pack)

A pack of (4) of the VEX 3.25" diameter wheels. These wheels include a tire designed for optimal grip on soft surfaces like the foam tiles used in the VEX Robotics Competition. Removable wheel inserts allow for additional versatility - use these wheels with either standard Drive Shafts or High Strength Shafts, in either a driven or free spinning application.

  • High traction tire profile
  • Versatile wheel inserts for a variety of applications
  • Contains direct mounting holes for gears or sprockets

P/N: 276-3525
$19.99
In stock
3.25" Omni-Directional Wheel (4-Pack)

Omni-Directional wheels roll forward like normal wheels, but slide sideways with almost no friction (no skidding during turns). These wheels are the same size as the VEX 3.25" Traction Wheels. Removable wheel inserts allow for additional versatility - use these wheels with either standard Drive Shafts or High Strength Shafts, in either a driven or free spinning application.

  • 3.25" Omni Wheels roll sideways with very little friction
  • Versatile wheel inserts for a variety of applications
  • Contains direct mounting holes for gears or sprockets

P/N: 276-3526
$39.99
In stock
4" Wheel (4-pack)

A pack of (4) of the VEX 4" diameter wheels. These wheels include a tire which works well on any surface.

  • High Traction square tread.
  • Removing the tread leaves a ribbed plastic wheel.

P/N: 276-1497
$19.99
In stock
4" High Traction Tire (4-pack)
4" High Traction Tire (4-pack)

The VEX 4" High Traction Tires are replacements for the "all-purpose" treads found on VEX 4" diameter wheels. These tires are designed to provide high traction on smooth surfaces.

*Note: This kit includes tires only, wheel rims not included. Simply remove the current 4" tires from their plastic rims and replace them with these high traction ones.

P/N: 276-1489
$12.99
In stock
4" Omni-Directional Wheel (2-pack)

Omni-Directional wheels roll forward like normal, but slide sideways with almost no friction. Use these wheels to make your robot turn smoothly.

  • 4" Omni Wheels roll sideways with very little friction.
  • Minimize skidding during turns.
  • Build a holonomic drive.

P/N: 276-2185
$24.99
In stock
Mecanum Wheel 4" (4-pack)

Mecanum wheels allow savvy robot designers to create drivetrains capable of moving in any direction using a standard chassis shape. Simply power each wheel with a different motor and by changing the directions the wheels spin get your robot to move in different directions!

  • Allows robots to move in any direction.
  • Split Roller style design.
  • 14 rollers per wheel.

P/N: 276-1447
$59.99
In stock
5" Wheel (4-pack)

A pack of (4) of the VEX 5" diameter Wheels. These wheels include a knobby tire which works great on rough terrain or loose surfaces.

  • High Traction rough knobby tread.
  • Removing the tread leaves a ribbed plastic wheel.

P/N: 276-1498
$19.99
In stock
6" Wheel Leg (4-pack)

Create robots capable of climbing over almost any obstacle.

  • Traverse rough surfaces.
  • Build Off-Road Robots.
  • Includes (4) 6" Diameter VEX Wheel Legs.

P/N: 276-2218
$24.99
In stock
In stock
Drive Shafts (2-choices)

The square shaft has rounded corners which allow it to spin easily in a round hole, while locking to a square hole.

  • Three length: 2", 3", and 12".
  • Use the 12" to make your own custom length shafts.
  • Works with motors, wheels, gears, and bearings.

Starting at: $5.49
In stock
Shaft Collar (16-pack)

Collars lock to drive shafts, keeping wheels and gears from sliding along the shaft. Collars fit around Drive Shafts and can be fastened in place using a setscrew.

  • Designed specifically for the VEX Drive Shaft.
  • Set screw uses the same Hex Key as the 6-32 Motor Screws.

P/N: 276-2010
$7.99
In stock
Clamping Shaft Collar (10-Pack)

Shaft collars for VEX EDR Drive Shafts. This clamping-style collar uses standard VEX EDR button head screws and nuts to maintain a tight lock without scratching or damaging the shaft.

  • Designed specifically for VEX EDR Drive Shafts
  • Standard VEX EDR screws use a 3/32" allen key
  • Clamping collar is easily adjustable without damaging shaft

P/N: 276-3891
$4.99
Out of stock
Pillow Block Bearing & Lock Bar Pack

Bearing Blocks mount on a piece of structure and supports a shaft which is offset either above, below, or to the side of the structure. Lock Bars allow any VEX component to be “locked” to a shaft so that it will spin with the shaft.

  • Bearing blocks mount on a piece of structure to support a shaft.
  • Lock Bars allow VEX components to be "locked" to a shaft.
  • These items are not sold separately

P/N: 276-2016
$7.99
In stock
Bearing Flat (10-pack)

The Bearing Flat mounts directly on a piece of VEX structure and supports a shaft which runs perpendicular and directly through the structure.

P/N: 276-1209
$4.99
In stock
Washers (2-choices)

A washer is a thin disk with a hole used to distribute the load of a threaded fastener. All VEX washers fit on all VEX screws and VEX shafts.

  • Steel washers are a good all-purpose washer.
  • Telfon washers are low friction. Use on shafts where metal rubs on metal.

Starting at: $4.95
In stock
Spacers (3-choices)

A spacer is used to create a space between two objects, often to properly position them. Available in various lengths.

  • Eliminate slop on shafts.
  • Add space between metal parts.
  • Plastic and Nylon options.

In stock
High Strength Shaft Insert Kit

Removable inserts for High Strength Gears and some wheels that allow for versatility in user application. Switch from a driven gear (square hole) to a free spinning one (round hole) in seconds.

  • Increased versatility during design and construction
  • Free spinning plastic and high strength metal inserts available
  • Fits VEX EDR drive shafts (0.125" square bars)

P/N: 276-3881
$9.99
In stock
High Strength Shafts (4-choices)

Larger 1/4" shafts are tougher, stronger, and ready for even the most stressful robotic applications. These thicker shafts are less resistant to both twisting and bending fatigue, meaning that you should have no fear of designing high-torque gearboxes or high-impact drivetrains.

  • Works with all VEX High Strength Gears
  • Works with the 3.25" Omni Wheel and 3.25" Traction Wheel
  • Four lengths: 2", 3", 4", 12"
  • Use the 12" to make your own custom length shafts

In stock
High Strength Clamping Shaft Collar (10-Pack)

Shaft collars designed to fit onto High Strength Shafts. This clamping-style collar uses standard VEX EDR button head screws and nuts to maintain a tight lock without scratching or damaging the shaft.

  • Designed specifically for VEX High Strength Shafts
  • Standard VEX EDR screws use a 3/32" allen key
  • Clamping collar is easily adjustable without damaging shaft

P/N: 276-3520
$9.99
Coming Soon
High Strength Shaft Bearing (10-Pack)

The High Strength Shaft Bearing is a larger version of the Bearing Flat that is designed for the 0.25" High Strength Shafts.

P/N: 276-3521
$7.99
In stock
High Strength Shaft Spacer Kit

Spacers designed for use on VEX High Strength Shafts. Spacers are often used to properly position objects on a shaft or to reduce friction.

  • Four sizes available
  • Eliminate slop on shafts
  • Add space between metal parts

P/N: 276-3441
$9.99
Out of stock
Advanced Mechanics and Motion Kit

This kit contains a variety of mechanisms to help a robot builder learn about the mechanics of motion. Use them to see examples of worm gears, lead screws, universal joints, bevel gear reductions and rotary cams.

  • Create complex robot mechanisms.
  • Learn advanced mechanics principles.

P/N: 276-2045
$24.99
In stock
Turntable Bearing Kit

The VEX Turntable Bearing Kit provides two options for low friction, high load rotational joints. These are especially well suited for rotational joints with lots of side load - this kit makes it easy to build a turret on your robot! Integrated gearing makes each turntable simple to actuate while other features allow for a variety of design uses.

  • (1) 2.6" diameter Turntable Bearing
  • (1) 4.25" diameter Turntable Bearing

P/N: 276-1810
$19.99
In stock
Linear Motion Kit

The Linear Motion Kit provides a method for VEX builders to create linear mechanisms. Utilize the low friction slide rails for your own mechanisms or combine them with included Rack Brackets and VEX Rack Gears (not included) to build direct driven linear actuators. Each of the plastic slide trucks has self-tapping holes for VEX 8-32 screws which allows for easy assembly.

  • The rails have holes on 0.500" increments.
  • Two rail lengths included - 12" and 17.5"
  • Use with VEX 8-32 hardware (not included)

P/N: 276-1926
$24.99
In stock
Winch and Pulley Kit

This kit provides the ability to implement a winch and pulley system and create block and tackle mechanisms to utilize mechanical advantage.

  • Lift, lower, hang, drag and more.
  • Configurable for many applications.
  • Ratchet and Pawl can be engaged to prevent back driving.

P/N: 276-1546
$14.99
In stock
Swerve Drive Kit

The swerve drive kit lets you build a unique drive and steering configuration for your VEX robot. Get unmatched maneuverability and versatility with drive pods which can rotate up to 360 degrees.

  • Improve robot maneuverability.
  • Unique steering and drive arrangement.
  • Steel brackets included.

P/N: 276-0506
$14.99
In stock
Shaft Coupler (5-pack)

Shaft couplers are the same length as old VEX clutches, allowing 2-Wire Motors to be used in places that previously had a clutch without changing shaft length.

  • Makes replacing 3-Wire Motors quick and simple.
  • Placement between motor and drive shaft makes changing shafts easier.

P/N: 276-1843
$4.99
In stock
Universal Joint (5-pack)

Universal joints provide a mechanical link between two intersecting, non-parallel shafts. Each side of the VEX U-Joint includes a socket for a VEX square shaft, and a set-screw to hold the shaft in place.

  • Create complex robot mechanisms
  • Transfer power "around corners" and at angles

P/N: 276-2723
$9.99
In stock
Clutch (3-pack)

For use with a VEX Continuous Rotation Motor or VEX Servo.

  • (3) Clutches
  • (3) Short Axles for Clutches

P/N: 276-1098
$4.95
In stock
Pneumatics Kit 1 - Single Acting Cylinders

Complete pneumatics add-on for the VEX Robotics system.

  • Uses one VEX Controller I/O port per air cylinder
  • Reservoir is filled using a standard tie pump fitting
  • Single Acting cylinder kit (air push, spring return)

P/N: 275-0274
$179.95
In stock
Pneumatics Kit 1A - Single Acting Cylinder Add-On

Adds one Cylinder (Air Push, Spring Return) to Pneumatic Kit 1 or Pneumatic Kit 2.

  • Add-on Kit.
  • An Air Push or a Spring Return.
  • Cannot be used without Kit 1 or Kit 2.

P/N: 275-0275
$59.95
In stock
Pneumatics Kit 2 - Double Acting Cylinders

A complete pneumatics add-on for the Vex Robotics system including Double Acting Cylinders.

  • Complete pneumatics add-on for the Vex Robotics system.
  • Double Acting Cylinders.
  • Uses one VEX Controller I/O port per air cylinder.
  • Reservoir is filled using a standard tie pump fitting.

P/N: 275-0276
$229.95
In stock
Pneumatics Kit 2A - Double Acting Cylinder Add-On
Kit 2A adds one Cylinder (Bi-directional) to Kit 1 or Kit 2.

  • Add-on Kit.
  • Double Acting Cylinders.
  • Cannot be used without Kit 1 or Kit 2.

P/N: 275-0277
$89.95
In stock
Pneumatics Tubing (5')

5ft. of Polyurethane Tubing for use with VEX Robotics Pneumatics. (Black, 5/32" OD)

  • 5ft. of Polyurethane Tubing.
  • Compatible with VEX Robotics Pneumatics.

P/N: 275-0447
$4.95
In stock
Solenoid Driver Cable (2-pack)

This Pneumatic Solenoid Driver Cable is this same driver cable that is included in the Pneumatic Kits. This cable takes the digital On\Off signal and controls the 5V power applied to a pneumatic solenoid.

  • 3 wire PWM Connector to connect to the VEX Microcontroller.
  • 2 wire Pneumatic Connector to connect to the Pneumatic Solenoid.
  • Rated for about 3/4 Amp.

P/N: 275-1417
$29.99
In stock
Claw Kit

Easily grab and manipulate various objects. Motor required and not included.

  • Strong Enough to hold a 12 oz soda can.
  • Dexterous Enough to grab a Feather.
  • Compatible with all VEX Mechanical Parts.

P/N: 276-2212
$19.99
In stock
2-Wire Motor 269

Add motors to power more wheels or add an end effector to take your robot to the next level.

Discontinued. We recommend the 2-Wire Motor 393 as a replacement option.

P/N: 276-2181
$12.99
Discontinued
Motor 269 Replacement Gears

Need new motor gears? This convenient replacement gear pack for the 2 Wire Motor 269 will get you going again without having to purchase a new motor.

  • Only for the 2 Wire Motor 269
  • Includes all internal gears for the 2 Wire Motor 269

P/N: 276-2188
$4.99
In stock
Replacement Gears for 3-Wire Servo

A pack of replacement gears for the 276-2163 VEX Motor and VEX Servo.

  • Replaces all internal gears except metal motor pinion.
  • Compatible with 3-Wire PWM Motor Module (discontinued).
  • Compatible with 3-Wire PWM Servo Module.

Discontinued. Available while supplies last.

P/N: 276-2025
$1.99
In stock
1/4" Pitch Bearing Flat (10-pack)

Use with 1/4" Pitch Metal Only. These 1/4" Pitch Acetal Bearings are specifically designed to mount to VEX 1/4" Pitch Metal. Use them with other components from the VEX Motion Subsystem to create intricate and compact mechanisms.

Discontinued. Available while supplies last.

P/N: 276-2179
$4.99
In stock
66 Item(s) Show per page
View as: List  Photos  Sort by Set Descending Direction
 

Filter by

Parts Products
  1. Motor & Servo (2)
Logic Products
  1. Other (2)
Motion Products
  1. Motors & Servos (7)
  2. Wheels (12)
  3. Gears (8)
  4. Chain & Sprockets (5)
  5. Tank Tread (2)
  6. Drive Shafts (2)
  7. Collars & Spacers (5)
  8. Bearings & Locks (4)
  9. Other (15)
Structure Products
  1. Hardware (1)
  2. Metal (4)

My Cart

You have no items in your shopping cart.

NAVIGATION

Education Competition Design
Motion Structure Power
Sensors Logic Control

Newsletter

Newsletter