You're currently on:

Structure


Structure

Structure Accessories

The structural subsystem of the robot is responsible for physical support. It holds everything in place, and is, in effect, the durable “skeleton” of the robot to which all the other subsystems are attached. The Structure and Motion subsystems are very tightly integrated to form the chassis of the robot.


47 Item(s) Show per page
View as: List  Photos  Sort by Set Descending Direction
Booster Kit
Contains parts recommended by VEX builders to maximize versatility!
  • (39)Steel Parts
  • (25)Gears & Rollers & Clutches
  • (70)Collars & Shafts & Bearings
  • (66)Standoffs & Spacers
  • (408)Screws & Nuts & Washers

P/N: 276-2232
$179.99
In stock
Metal & Hardware Kit
More tools for building the ultimate robot.
  • (17)Steel Parts
  • (52)Collars & Shafts & Bearings
  • (66)Standoffs & Spacers
  • (259)Screws & Nuts & Washers

P/N: 276-2161
$79.99
In stock
Aluminum Kits

Use VEX Aluminum pieces to lighten the total weight of a robot or mechanism while still keeping it strong.

  • Compatible with all VEX Motion and Structure components.
  • Available in bundle kits or in single part multi-packs

Starting at: $24.99
In stock
Plates (2-sizes)

Plate with holes on 0.500" increments and 1/8" diamonds in between. Can be cut on 0.500" increments.

  • Available in two sizes.
  • Made from cold rolled steel, 0.046" thick, zinc plated.

In stock
Base Plate 30x15 (2-pack)

VEX Base Plates are designed to serve as a foundation for a variety of robotics applications.

  • (2) Base Plates included
  • 15-holes wide x 30-holes long
  • Made from cold rolled steel, 0.046" thick, zinc plated.

P/N: 276-1341
$29.99
In stock
Angles (3-sizes)

VEX angle without slots. Typically used for structural framing. Good strength on two axis.

  • Can be cut on 0.500" increments.
  • Made from cold rolled steel, 0.046" thick, zinc plated
  • All items are (4) to a package.

Starting at: $14.99
In stock
Rails (2-choices)

The Chassis Rails are part of the larger VEX Chassis Kits. This rail has holes on 0.500" increments and another row in-between. This part is a versatile angle with one narrow side and one taller side.

  • Made from cold rolled steel, 0.046" thick, zinc plated.
  • All items are (4) to a package.

Starting at: $14.99
In stock
C-Channels (3-sizes)

VEX C-channel has holes on 0.500" increments. This structural member is perfect for building bigger robots. Excellent strength and twist resistance.

  • Three sizes available.
  • Made from cold rolled steel, 0.046" thick, zinc plated.
  • Each channel is segmented into cuttable 2.5" pieces

Starting at: $8.99
In stock
Bar 1x25 (8-pack)

VEX bar with holes on 0.500" increments. Can be cut on 0.500" increments.

  • Made from cold rolled steel, 0.046" thick, zinc plated.
  • The item is (8) to a package.

P/N: 275-1141
$12.99
In stock
Drive Shaft Bar Lock (8-pack)

Metal version of the shaft locking part. Three locations for square shafts.

  • Very strong.
  • Made from cold rolled steel, 0.046" thick, zinc plated.
  • Sold in packs of 8.

P/N: 275-1065
$6.45
In stock
Gusset Pack

Six gussets in one pack

P/N: 276-1110
$7.49
In stock
45 Degree Gusset (6-pack)

Need to make a 45 degree angle in your application? The 45 Degree Gusset Pack will make this task easy.

  • Sold in packs of 6 each.
  • 45 Degree Gusset

P/N: 275-1186
$4.99
In stock
Pivot Gusset (6-pack)

Bracket allows parts to be connected at any angle from 0 to 90 degrees. Can also be used as a corner gusset.

  • Made from cold rolled steel, 0.046" thick, zinc plated.
  • Sold in packs of 6.

Discontinued. Available while supplies last.

P/N: 275-1062
$5.95
In stock
Angle Corner Gusset (4-pack)

Use these Angle Corner Gussets to attach VEX 2x2 Angles together at a 90-degree corner.

  • Useful for making structural corners on cubes!
  • Includes (4) Angle Corner Gussets.

P/N: 276-2576
$19.99
In stock
C-Channel Coupler Gusset (8-pack)

Use these C-Channel Couplers to attach two VEX 1x2x1 C-Channels together in line to make longer structural pieces.

  • Allows for greater mounting versatility using VEX Structural parts.
  • Includes (8) C-Channel Coupler Gussets.

P/N: 276-2575
$19.99
In stock
90-Degree Gusset Set (4-pack)

Use these Gussets to connect VEX structural C-Channels and Angles at 90-degree connections.

  • Allows for greater mounting versatility using VEX Structural parts.
  • Includes (4) each of 90-Degree Gusset Angles and Plates.

P/N: 276-2577
$12.99
In stock
Angle Coupler Gusset (8-pack)

Use these Angler Couplers to attach two VEX 2x2 Angles together in line to make longer structural pieces.

  • Allows for greater mounting versatility using VEX Structural parts.
  • Includes (8) Angler Coupler Gussets.

P/N: 276-2578
$19.99
In stock
Hinge (2-pack)

This hinge provides a simple pivoting joint with 265 degree movement.

  • Sold in packs of 2.
  • 2.5" long x 1.3" wide.
  • Standard VEX holes.

P/N: 275-1272
$9.99
In stock
Chassis Kits (4-sizes)

VEXrobotics chassis kits are larger versions of the VEX standard kit chassis. Mix and match to make a total of 16 different chassis sizes.

  • Four sizes available: 15x16, 25x25, 35x35, and 35x35 super.
  • The Rails and Angles are also available individually.
  • 100% VEX Robotics compatible.
  • Hardware not included.

Starting at: $18.99
In stock
Worm Gearbox Bracket (2-pack)

This Bracket is designed with the VEX Worm Gear. This is the simplest way to mount and utilize the worm gears.

  • Designed for the VEX Worm Gears.
  • Metal only. Gears not included.
  • Sold in a pack of 2 brackets.

P/N: 275-1187
$12.99
In stock
Bevel Gearbox Bracket (2-pack)

Use additional standard VEX Motion Products (not included) to utilize this bracket with VEX Bevel Gears. There are 2 VEX Bevel Gear Brackets included in this kit.

  • Designed for the VEX Bevel Gears.
  • Metal only. Gears and bearings not included.
  • Sold in a pack of 2 brackets.

P/N: 275-1189
$9.99
In stock
Rack Gearbox Bracket (2-pack)

Uses the pinion gear to rotate the rack gear which will in turn slide linearly using the VEX Linear Slide Pack.

  • Create linear motion.
  • Designed for the Rack Gear.
  • Sold in a pack of two brackets.

P/N: 275-1188
$9.99
Out of stock
Nut Bar (4-pack)

The Nut Bar consists of a plastic piece with 20-holes sized such that VEX 8-32 screws will self-tap into them. By mounting these bars onto VEX structural metal, you create a series of holes which can be used as nuts. This allows a set of holes that can be mounted to without having access to the back side of the plate.

  • Can be used in tight places to help with robot assembly.
  • Snaps into smaller increments without tools.

P/N: 276-1748
$4.99
In stock
Bearing Pop Rivet (50-pack)

Bearing Pop Rivets make mounting the Flats Bearing onto VEX structural component easy. Reusable; simply push the pin out from the back side.

  • Speed up robot assembly.
  • 50 ea of the Bearing Pop Rivets.
  • Reusable.

P/N: 276-2215
$7.99
In stock
Screws 6-32 (2-choices)

6-32 Screw with Button Head. 5/64" VEX Allen Drive. High Strength Stainless Steel. Various lengths.

  • Use for Motors and Servos only.
  • High Strength Stainless Steel.

Starting at: $4.95
In stock
Screws 8-32 (11-choices)

8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths.

  • Standard Allen Drive VEX screw type.
  • High Strength Stainless Steel.

Starting at: $7.49
In stock
Screw 6-32 x 0.500" Locking (100-pack)

Screw 6-32 x 0.500" Locking (100-pack)

These screws have thread locker applied on their threads; this thread locker will help hold the screw in position. A Locking Screw can be installed and removed approximately 10-15 times and still retain a firm lock each time.

  • Use for Motors and Servos only.
  • High Strength Stainless Steel.

P/N: 276-1958
$9.99
In stock
Screws 8-32 Locking (2-choices)

These screws have thread locker applied on their threads; this thread locker will help hold the screw in position.

  • Can be used approximately 10-15 times and still retain a firm lock.
  • Provide similar functionality to the VEX Nylock Nuts.
  • Come in 2 sizes, 1/4 inch and 1/2 inch.

Starting at: $19.99
In stock
8-32 x 0.125" Setscrew (32-pack)

These 8-32 x 0.125" setscrews fit in VEX Shaft Collars. Use them as replacements or spare parts.

  • 8-32 thread.
  • Use 5/64 Allen to tighten.

P/N: 276-2385
$4.99
In stock
Shoulder Screws 8-32 (25-pack)

Shoulder Screws make low-slop pivots in VEX metal. Designed to fit snugly in a VEX square hole. Allows several layers of metal to pivot.

  • Perfect for pivots with minimal slop.
  • 0.176" dia x 0.20" long shoulder.
  • 3/32" Standard VEX Allen Drive.

P/N: 276-1408
$9.99
In stock
1/2" Thumbscrew (50-pack)

These plastic thumbscrews are the same size (8-32) as standard VEX screws only they have a 0.428" diameter knurled head so they can be tightened or loosened by hand. Great for applications where a screw will be inserted or removed multiple times, such as robot access panels or battery mounts.

  • Speed up robot assembly.
  • 50 ea of the 1/2" Thumbscrews

P/N: 275-1485
$9.99
In stock
Nuts 8-32 (3-choices)

A nut is a type of hardware fastener with a threaded hole. All VEX nuts are 8-32 threads.

  • Keps Nuts have integral external tooth lock washer.
  • Nylock nuts have internal nylon lock.
  • Hex nuts are non-locking.

Starting at: $2.99
In stock
Washers (2-choices)

A washer is a thin disk with a hole used to distribute the load of a threaded fastener. All VEX washers fit on all VEX screws and VEX shafts.

  • Steel washers are a good all-purpose washer.
  • Telfon washers are low friction. Use on shafts where metal rubs on metal.

In stock
Spacers (3-choices)

A spacer is used to create a space between two objects, often to properly position them. Available in various lengths.

  • Eliminate slop on shafts.
  • Add space between metal parts.
  • Plastic and Nylon options.

In stock
Couplers 8-32 (2-sizes)

The 8-32 Coupler is used to connect multiple Threaded Beams to each other. Now you can make custom length standoffs.

  • Double up standoffs
  • Allen socket in one end
  • 1/2" and 1" lengths

Starting at: $2.95
In stock
Rubber Link (4-pack)

A flexible link used to create flexible joints, springs, or to provide shock absorption.

  • Flexible joints between standoffs or metal.
  • Add spring force to your design.
  • Provide shock absorption to delicate parts.

P/N: 275-1029
$7.49
In stock
Cinch Strap (5-pack)

These VELCRO® brand Cinch Straps are great for quickly mounting objects. The Cinch Straps are reusable and adjustable.

  • Quickly mount an object.
  • Adjustable and reusable.
  • Secure holding circumference approximately 4 to 7 inches.

P/N: 275-1258
$9.99
In stock
Standoffs 8-32 (12-choices)

A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads.

  • Hex size is 0.250" across the flats.
  • Light weight aluminum.
  • Various lengths available.

Starting at: $2.95
In stock
VELCRO® Brand Adhesive Strip (5')

This adhesive VELCRO® Brand product has an adhesive backing so it can be attached directly to metal to hold a light weight object like a battery, create a trap door, or build a detachable part.

  • Adhesive backing.
  • Attach a light object like a battery.
  • Build a trap door or a detachable part.

P/N: 275-1257
$9.99
In stock
Latex Tubing (10')

This VEX Tubing can stretch up to 3 times its length and still spring back to its original shape. VEX Latex Tubing is great for any application on a VEX robot requiring spring loading.

  • Sold in two 5' lengths.
  • 53A durometer Latex.
  • Great for heavy lifting.

P/N: 275-1262
$9.99
In stock
VELCRO® brand ONE-WRAP® (5')

VELCRO® brand ONE-WRAP® can be used to attach a light weight object. This Wrap comes with Hook on one side and Loop on the other so that it attaches back to itself for a secure closure.

  • Attach a light weight object.
  • Hook on one side and Loop on the other.
  • Attaches back to itself.

P/N: 275-1259
$4.99
In stock
Adhesive Foam

Applications include robot bumpers, vibration isolation, accumulator backing, and any other applications requiring compression

  • 1" wide x 0.250" thick
  • Adhesive backed.

P/N: 275-1254
$9.99
In stock
Rubber Band #32 (20-pack)

#32 Rubber Bands have dozens of uses on a robot. The spring like properties make it perfect for latches, triggers, and return mechanisms.

  • #32 Rubber Bands
  • Synthetic Rubber
  • 3" x 1/8"

P/N: 275-1089
$1.49
In stock
Rubber Band #64 (10-pack)

#64 Rubber Bands have dozens of uses on a robot. The spring-like properties make it perfect for latches, triggers, and return mechanisms.

  • #64 Rubber Bands
  • Synthetic Rubber
  • 3.5" x 1/4"

P/N: 276-3990
$2.99
In stock
Anti-Slip Mat (2-types)

These high friction mats are cuttable and compressible. Use for adding grip, friction, or padding.

  • Available in two types, thin or thick.
  • Size is 12" x 15"

In stock
4" Zip Ties (100-pack)

Black Tie Wraps used to hold together and manage cables, band rubber chords, or attach to rollers or tank tread to assist an intake mechanism.

  • Tie together cables or rubber chords.
  • Attach to rollers or tank tread to assist an intake mechanism.
  • Rating of 18lbs.

P/N: 276-1032
$4.99
In stock
11" Zip Ties (100-pack)

Black Zip Ties used to tie larger objects like a pneumatic cylinder to metal or attach to rollers to assist an intake.

  • Tie larger objects to metal.
  • Attach to rollers to assist an intake.
  • Rating of 30lbs.

P/N: 275-0125
$6.99
In stock
47 Item(s) Show per page
View as: List  Photos  Sort by Set Descending Direction
 

Filter by

Structure Products
  1. Bundles (3)
  2. Chassis (2)
  3. Hardware (13)
  4. Metal (19)
  5. Plastic & Rubber (13)
Motion Products
  1. Gears (1)
  2. Collars & Spacers (1)

My Cart

You have no items in your shopping cart.

NAVIGATION

Education Competition Design
Motion Structure Power
Sensors Logic Control

Newsletter

Newsletter