You're currently on:

What's New

What's New

These are the newest additions to the VEX Robotics Design System.

For more information and discussion on these and other VEX products, visit the VEX Forum.

17 Item(s) Show per page
View as: List  Photos  Sort by Set Descending Direction
VEX Skyrise Field & Game Objects

This kit contains ALL Official VEX Skyrise Field & Game Objects.

  • (22) Red Cubes
  • (22) Blue Cubes
  • (2) High Posts
  • (4) Medium Posts
  • (4) Low Posts
  • (22) Collars
  • (14) Skyrise Sections
  • (2) Skyrise Bases
  • (1) Roll 2" Wide Blue Tape
  • (1) Roll 2" Wide Red Tape
  • (1) Roll 3/4" Wide White Tape
  • (20) Red Robot ID Flags
  • (20) Blue Robot ID Flags
  • All Necessary Assembly Hardware

Note: Competition Field Perimeter and foam Field Tiles are NOT included.

Shipping Note: The complete set of VEX Skyrise Field & Game Objects ships in (4) boxes and has a total weight of 95 lb. Please plan accordingly when choosing shipping options.

P/N: 276-3144
$499.99
In stock
VRC 2014-2015 Cube & Collar Kit

This kit contains game objects to help with practicing for VEX Skyrise.

  • (3) Red Cubes
  • (3) Blue Cubes
  • (3) Collars w/ Clamping Screws

Use the provided collars with your own PVC pipe to simulate VEX Skyrise Posts.

P/N: 276-3787
$49.99
In stock
VRC 2014-2015 Skyrise Section & Base Kit

This kit contains Skyrise Sections to help get started practicing for VEX Skyrise.

  • (7) Skyrise Sections
  • (1) Skyrise Base

Note: Metal Skyrise Base Plate is not included. Skyrise Base should be firmly attached to something before use.

P/N: 276-3993
$49.99
In stock
VRC License Plate Kit

License plates and identification numbers for teams competing in the VEX Robotics Competition.

  • Red & blue colors serve as alliance indicators as well as ID plates
  • Attaches using standard VEX EDR screws and nuts or VEX IQ pins
  • Plates come blank and are fully customizable

P/N: 276-3938
$4.99
In stock
393 Motor Turbo Gear Set (4-pack)

Use the Turbo Gear Set to push your motors to the fastest speeds ever seen in VEX robotics. This gear pack replaces the gears inside a 2-Wire Motor 393 for high-RPM, low-torque applications.

  • Only for 2-Wire Motor 393
  • 240 RPM output speed is 140% faster than standard gearing
  • Use with external gearing or large wheels for even more speed

P/N: 276-3527
$12.99
In stock
High Strength 84-Tooth Gear (4-Pack)

Build mechanisms capable of achieving higher torque or speed than ever before - lift heavier loads and survive bigger impacts with the additional gear ratio options provided by the largest high strength gear available.

  • Works with the VEX High Strength Gear Kit or any VEX spur gear
  • Double-thick face width and ribbing provide added strength
  • Metal Square Hole Inserts prevent axles from "stripping"

P/N: 276-3438
$12.99
In stock
High Strength Shafts (4-choices)

Larger 1/4" shafts are tougher, stronger, and ready for even the most stressful robotic applications. These thicker shafts are less resistant to both twisting and bending fatigue, meaning that you should have no fear of designing high-torque gearboxes or high-impact drivetrains.

  • Works with all VEX High Strength Gears
  • Works with the 3.25" Omni Wheel and 3.25" Traction Wheel
  • Four lengths: 2", 3", 4", 12"
  • Use the 12" to make your own custom length shafts

In stock
High Strength Clamping Shaft Collar (10-Pack)

Shaft collars designed to fit onto High Strength Shafts. This clamping-style collar uses standard VEX EDR button head screws and nuts to maintain a tight lock without scratching or damaging the shaft.

  • Designed specifically for VEX High Strength Shafts
  • Standard VEX EDR screws use a 3/32" allen key
  • Clamping collar is easily adjustable without damaging shaft

P/N: 276-3520
$9.99
In stock
High Strength Shaft Bearing (10-Pack)

The High Strength Shaft Bearing is a larger version of the Bearing Flat that is designed for the 0.25" High Strength Shafts.

  • Mounts directly onto VEX EDR structure
  • Low friction allows shafts to turn smoothly
  • Mount with Screws & Nuts or Pop Rivets

P/N: 276-3521
$7.99
In stock
High Strength Shaft Spacer Kit

Spacers designed for use on VEX High Strength Shafts. Spacers are often used to properly position objects on a shaft or to reduce friction.

  • Four sizes available
  • Eliminate slop on shafts
  • Add space between metal parts

P/N: 276-3441
$9.99
In stock
High Strength Sprocket Packs (6-choices)

These reinforced sprockets and chain can transmit higher loads over long distances. Use this kit to withstand higher stresses and lift heavier loads. Useful for any application where regular chain just won't cut it.

  • High Strength Design - lift up to 50 lbs
  • 12 Sprockets in 5 Sizes
  • 54" of Chain Links

In stock
High Strength Shaft Insert Kit

Removable inserts for High Strength Gears and some wheels that allow for versatility in user application. Switch from a driven gear (square hole) to a free spinning one (round hole) in seconds.

  • Increased versatility during design and construction
  • Free spinning plastic and high strength metal inserts available
  • Fits VEX EDR drive shafts (0.125" square bars)

P/N: 276-3881
$9.99
In stock
3.25" Traction Wheel (4-Pack)

A pack of (4) of the VEX 3.25" diameter wheels. These wheels include a tire designed for optimal grip on soft surfaces like the foam tiles used in the VEX Robotics Competition. Removable wheel inserts allow for additional versatility - use these wheels with either standard Drive Shafts or High Strength Shafts, in either a driven or free spinning application.

  • High traction tire profile
  • Versatile wheel inserts for a variety of applications
  • Contains direct mounting holes for gears or sprockets

P/N: 276-3525
$19.99
In stock
3.25" Omni-Directional Wheel (4-Pack)

Omni-Directional wheels roll forward like normal wheels, but slide sideways with almost no friction (no skidding during turns). These wheels are the same size as the VEX 3.25" Traction Wheels. Removable wheel inserts allow for additional versatility - use these wheels with either standard Drive Shafts or High Strength Shafts, in either a driven or free spinning application.

  • 3.25" Omni Wheels roll sideways with very little friction
  • Versatile wheel inserts for a variety of applications
  • Contains direct mounting holes for gears or sprockets

P/N: 276-3526
$39.99
In stock
Battery Extension Cable

This 12" battery extension cable allows for greater flexibility in robot design. Now you can design a battery compartment into your robot regardless of where the microcontroller is mounted.

  • Designed for either of the VEX 7.2V Robot Batteries
  • Mounting plate makes a permanent battery fixture easy

P/N: 276-3442
$4.99
Coming Soon
Clamping Shaft Collar (10-Pack)

Shaft collars for VEX EDR Drive Shafts. This clamping-style collar uses standard VEX EDR button head screws and nuts to maintain a tight lock without scratching or damaging the shaft.

  • Designed specifically for VEX EDR Drive Shafts
  • Standard VEX EDR screws use a 3/32" allen key
  • Clamping collar is easily adjustable without damaging shaft

P/N: 276-3891
$4.99
In stock
VEXnet Key 2.0

The VEXnet Key 2.0 provides wireless communication between VEX Microcontrollers and VEXnet Joysticks. This key utilizes the new VEXnet 2.0 communication protocol over a custom 2.4 GHz data radio.

  • Works with the VEX Cortex Microcontroller
  • Uses VEXnet 2.0 communication protocol over 2.4 GHz data radio
  • Rubber fins help retain key once installed

P/N: 276-3245
$39.99
In stock
17 Item(s) Show per page
View as: List  Photos  Sort by Set Descending Direction
 

My Cart

You have no items in your shopping cart.

NAVIGATION

Education Competition Design
Motion Structure Power
Sensors Logic Control

Newsletter

Newsletter