You're currently on:

View All

107 Item(s) Show per page
View as: List  Photos  Sort by Set Descending Direction
Booster Kit
Contains parts recommended by VEX builders to maximize versatility!
  • (39)Steel Parts
  • (25)Gears & Rollers & Clutches
  • (70)Collars & Shafts & Bearings
  • (66)Standoffs & Spacers
  • (408)Screws & Nuts & Washers

P/N: 276-2232
In Stock
Metal & Hardware Kit
More tools for building the ultimate robot.
  • (17)Steel Parts
  • (52)Collars & Shafts & Bearings
  • (66)Standoffs & Spacers
  • (259)Screws & Nuts & Washers

P/N: 276-2161
In Stock
Aluminum Kits

Use VEX Aluminum pieces to lighten the total weight of a robot or mechanism while still keeping it strong.

  • Compatible with all VEX Motion and Structure components.
  • Available in bundle kits or in single part multi-packs

Starting at: $24.99
In Stock
C-Channels (8-sizes)

VEX C-channel has holes on 0.500" increments. This structural member is perfect for building bigger robots. Excellent strength and twist resistance.

  • Multiple sizes available, in two different material types
  • Made from cold rolled steel, or 5052-H32 Aluminum
  • Each channel is segmented into cuttable 2.5" pieces

Starting at: $8.99
In Stock
Angles (3-sizes)

VEX angle without slots. Typically used for structural framing. Good strength on two axis.

  • Can be cut on 0.500" increments.
  • Made from cold rolled steel, 0.046" thick, zinc plated
  • All items are (4) to a package.

In Stock
Rails (2-choices)

The Chassis Rails are part of the larger VEX Chassis Kits. This rail has holes on 0.500" increments and another row in-between. This part is a versatile angle with one narrow side and one taller side.

  • Made from cold rolled steel, 0.046" thick, zinc plated.
  • All items are (4) to a package.

In Stock
Plates (2-sizes)

Plate with holes on 0.500" increments and 1/8" diamonds in between. Can be cut on 0.500" increments.

  • Available in two sizes.
  • Made from cold rolled steel, 0.046" thick, zinc plated.

In Stock
Chassis Kits (4-sizes)

VEXrobotics chassis kits are larger versions of the VEX standard kit chassis. Mix and match to make a total of 16 different chassis sizes.

  • Four sizes available: 15x16, 25x25, 35x35, and 35x35 super.
  • The Rails and Angles are also available individually.
  • 100% VEX Robotics compatible.
  • Hardware not included.

Starting at: $18.99
In Stock

Gussets are used to connect pieces of metal that may not have been possible beforehand. They also serve as a great way to strengthen your robot's joints.

Starting at: $4.99
In Stock
Hinge (2-pack)

This hinge provides a simple pivoting joint with 265 degree movement.

  • Sold in packs of 2.
  • 2.5" long x 1.3" wide.
  • Standard VEX holes.

P/N: 275-1272
In Stock

Screws are the proverbial glue that hold your robot together. VEX screws come in a multitude of lengths and two standard head sizes. We think they're pretty nifty.

Locking screws are like normal screws.... only tougher to remove. These screws have been coated with a thread locker to help keep them locked into place. A locking screw can be installed 10-15 times and still retain a firm lock. Double check your hole-counting when mounting!

Note: All screw sizes are available in Hexagon Head, or high-torque Star head.

Starting at: $4.95
In Stock
Nuts 8-32 (3-choices)

A nut is a type of hardware fastener with a threaded hole. All VEX nuts are 8-32 threads.

  • Keps Nuts have integral external tooth lock washer.
  • Nylock nuts have internal nylon lock.
  • Hex nuts are non-locking.

In Stock
Couplers 8-32 (2-sizes)

The 8-32 Coupler is used to connect multiple Threaded Beams to each other. Now you can make custom length standoffs.

  • Double up standoffs
  • Allen socket in one end
  • 1/2" and 1" lengths

Starting at: $1.99
In Stock
Standoffs 8-32 (12-choices)

A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads.

  • Hex size is 0.250" across the flats.
  • Light weight aluminum.
  • Various lengths available.

Starting at: $2.95
In Stock
Latex Tubing (10')

This VEX Tubing can stretch up to 3 times its length and still spring back to its original shape. VEX Latex Tubing is great for any application on a VEX robot requiring spring loading.

  • Sold in two 5' lengths.
  • 53A durometer Latex.
  • Great for heavy lifting.

P/N: 275-1262
In Stock
Cinch Strap (5-pack)

These VELCRO® brand Cinch Straps are great for quickly mounting objects. The Cinch Straps are reusable and adjustable.

  • Quickly mount an object.
  • Adjustable and reusable.
  • Secure holding circumference approximately 4 to 7 inches.

P/N: 275-1258
In Stock
VEX EDR 393 motors are the primary motors used for robot mechanisms. We also offer replacement gears to give your motors a speed boost. Use 393's to power your intakes, lifts, and drivetrains.

Starting at: $4.95
In Stock

Defense may not always win championships, but being able to move does. Put some power on the floor with our large variety of wheel options available for builders. Omni-Directional or Mecanum Wheels are great for quick, lateral movements. Need more power? Traction Wheels offer great pushing ability and are designed for optimal grip on soft surfaces like the foam tiles used in the VEX Robotics Competition.

Starting at: $9.99
In Stock
Advanced Gearbox Brackets

These gearbox brackets provide support for several options of advanced motion. These parts allow advanced mechanical VEX EDR designers to create new ingenious mechanisms.

  • Create Linear Motion with Rack Gears
  • Transfer Motion 90 degrees with Bevel Gears
  • Add a Differential to your Drivetrain
  • Get a high-reduction with the Worm Gears
  • Increase design possibilities for your robots

Starting at: $9.99
In Stock

Gears are one of the primary sources of power transmission in VEX EDR. We offer a variety of both normal and high strength gears, that come in a multitude of shapes and sizes.

Starting at: $12.99
In Stock
Sprockets & Chain
Chain and Sprockets are the best way to transfer power over long distances on your VEX EDR robot. These chains are designed to carry moderate loads, and our sprockets come in a variety of sizes to create a number of ratio possibilities. Each chain link is also a master link, which allows for quick and painless substitution.

In Stock
High Strength Sprockets & Chain

High Strength Sprockets and Chain allow for higher loads to be transmitted across long distances. The Sprockets come in five different sizes, allowing for numerous ratios to best suit your needs. The High Strength and Sprockets are also capable of lifting up to 50 pounds, so make sure to use them on your heavy lifting mechanisms!

Starting at: $12.99
In Stock
Tank Tread Kit

Use this tank tread to build robot tracks which can overcome tough terrain, or build a conveyor belt for scooping up objects.

  • Climb over obstacles and traverse tough terrain.
  • Drive through sandy or soft spongy surfaces.
  • Can be used for a robot conveyor belt.
  • Every section is a master link, create treads of any length.

P/N: 276-2168
In Stock
Shafts & Hardware
Because that wheel isn't going to drive itself. Give your motors something to turn with VEX EDR Drive Shafts. Want a smoother ride? Use Bearings and Shaft Collars to keep your mechanisms and wheels moving smoothly, and locked into place. Use spacers if certain parts of your robot need to be properly positioned, or you need to add space between metal.

Starting at: $2.99
In Stock
High Strength Shafts & Hardware
Well something has to power that 1:4 drivetrain doesn't it? VEX EDR High Strength Shafts and hardware are specifically designed for those applications that typical shafts just can't handle. Use these shafts in high-torque or high-impact situations, and never worry about your gearbox or intake breaking again.

In Stock
Advanced Mechanics and Motion Kit

This kit contains a variety of mechanisms to help a robot builder learn about the mechanics of motion. Use them to see examples of worm gears, lead screws, universal joints, bevel gear reductions and rotary cams.

  • Create complex robot mechanisms.
  • Learn advanced mechanics principles.

P/N: 276-2045
In Stock
Linear Motion Kit

The Linear Motion Kit provides a method for VEX builders to create linear mechanisms. Utilize the low friction slide rails for your own mechanisms or combine them with included Rack Brackets and VEX Rack Gears (not included) to build direct driven linear actuators. Each of the plastic slide trucks has self-tapping holes for VEX 8-32 screws which allows for easy assembly.

  • The rails have holes on 0.500" increments.
  • Two rail lengths included - 12" and 17.5"
  • Use with VEX 8-32 hardware (not included)

P/N: 276-1926
In Stock
Linear Motion Additional Truck Kit
Spare plastic trucks from the VEX EDR Linear Motion Kit. Includes (8) Inner Slide Trucks and (8) Outer Slide Trucks.

P/N: 276-4489
In Stock
Turntable Bearing Kit

The VEX Turntable Bearing Kit provides two options for low friction, high load rotational joints. These are especially well suited for rotational joints with lots of side load - this kit makes it easy to build a turret on your robot! Integrated gearing makes each turntable simple to actuate while other features allow for a variety of design uses.

  • (1) 2.6" diameter Turntable Bearing
  • (1) 4.25" diameter Turntable Bearing

P/N: 276-1810
In Stock
Universal Joint (5-pack)

Universal joints provide a mechanical link between two intersecting, non-parallel shafts. Each side of the VEX U-Joint includes a socket for a VEX square shaft, and a set-screw to hold the shaft in place.

  • Create complex robot mechanisms
  • Transfer power "around corners" and at angles

P/N: 276-2723
In Stock
Intake Roller (2 options)

Intake rollers are specifically designed for ball intake systems. The flexible rubber fingers grip the ball. The fingers also deflect, allowing for ball size variation.

Starting at: $3.99
In Stock
Pneumatic cylinders use compressed air, rather than motors to produce motion that rests in one of 2 states: fully extended or fully retracted. The cylinder in Pneumatics Kit 1 is single-acting -- it uses air to extend the cylinder rod, but uses a spring to return to its contracted state. As a result, the cylinder may expand and contract at different speeds. In contrast, the cylinders in Pneumatics Kit 2 are double-acting and use compressed air to both extend and retract.

Starting at: $4.95
In Stock
Swerve Drive Kit

The swerve drive kit lets you build a unique drive and steering configuration for your VEX robot. Get unmatched maneuverability and versatility with drive pods which can rotate up to 360 degrees.

  • Improve robot maneuverability.
  • Unique steering and drive arrangement.
  • Steel brackets included.

P/N: 276-0506
In Stock
Winch and Pulley Kit

This kit provides the ability to implement a winch and pulley system and create block and tackle mechanisms to utilize mechanical advantage.

  • Lift, lower, hang, drag and more.
  • Configurable for many applications.
  • Ratchet and Pawl can be engaged to prevent back driving.

P/N: 276-1546
In Stock
Claw Kit

Easily grab and manipulate various objects. Motor required and not included.

  • Strong Enough to hold a 12 oz soda can.
  • Dexterous Enough to grab a Feather.
  • Compatible with all VEX Mechanical Parts.

P/N: 276-2212
In Stock
Replacement Gears for 3-Wire Servo

A pack of replacement gears for the 276-2163 VEX Motor and VEX Servo.

  • Replaces all internal gears except metal motor pinion.
  • Compatible with 3-Wire PWM Motor Module (discontinued).
  • Compatible with 3-Wire PWM Servo Module.


P/N: 276-2025
2-Wire Motor 269

Add motors to power more wheels or add an end effector to take your robot to the next level.

Discontinued. We recommend the 2-Wire Motor 393 as a replacement option.

P/N: 276-2181
Motor 269 Replacement Gears

Need new motor gears? This convenient replacement gear pack for the 2 Wire Motor 269 will get you going again without having to purchase a new motor.

  • Only for the 2 Wire Motor 269
  • Includes all internal gears for the 2 Wire Motor 269


P/N: 276-2188
VEXnet System Bundle

The VEXnet System Bundle contains everything you need to get started controlling a VEX robot using the VEX ARM® Cortex®-based Microcontroller.

  • (1) VEX ARM® Cortex®-based Microcontroller
  • (1) VEXnet Joystick
  • (2) VEXnet Key 2.0
  • (1) VEXnet Backup Battery Holder
  • (1) USB A-A Cable

P/N: 276-1604
In Stock
VEX ARM® Cortex®-based Microcontroller

The VEX ARM® Cortex®-based Microcontroller coordinates the flow of information and power on the robot. All other electronic system components must interface to the Microcontroller.

  • STMicroelectronics ARM® Cortex® M3 user processor
  • Wireless with built-in VEXnet technology
  • (8) Standard 3-wire Motor ports
  • (2) 2-wire Motor ports
  • More than 20 sensor inputs and outputs
  • Programmable with easyC v4 or ROBOTC for VEX Robotics v4.x

P/N: 276-2194
In Stock
VEXnet Key 2.0

The VEXnet Key 2.0 provides wireless communication between VEX ARM® Cortex®-based Microcontroller and VEXnet Joysticks. This key utilizes the new VEXnet 2.0 communication protocol over a custom 2.4 GHz data radio.

  • Works with the VEX ARM® Cortex®-based Microcontroller
  • Uses VEXnet 2.0 communication protocol over 2.4 GHz data radio
  • Rubber fins help retain key once installed

P/N: 276-3245
In Stock

It might be hard to drive your robot without a controller. The VEXnet Joystick allows a human operator to control their robot in real time.

Starting at: $29.99
In Stock
USB A-A Tether Cable 6'

Cable for connecting VEXnet components to sync and run in tether mode. Includes (1) VEX USB A-A Tether Cable 6'.

  • Works with the VEXnet Upgrade
  • Works with the VEX ARM® Cortex®-based Microcontroller
  • Works with the VEXpro ARM9 Microcontroller

P/N: 276-1403
In Stock
VEXnet Joystick Power Adapter

Extend your runtime by powering your VEXnet Joystick directly from a wall outlet. Simply connect this adapter to the VEXnet Joystick's programming port and you're good to go for hours and hours.

P/N: 276-1701
In Stock
Coiled Handset Cable

Plug a VEXnet Joystick into a Partner Joystick for advanced robot control. The VEX Robotics Competition allows two drivers per team on the field using this setup.

  • Connects the VEXnet Joystick to a Partner Joystick.
  • 18" long unextended. 12 feet long stretched.

P/N: 276-1602
In Stock
Batteries & Chargers
Robots just look better when they move without help. Power yours with a variety of VEX EDR rechargeable batteries.

Starting at: $1.99
In Stock
Advanced Sensor Kit

Increase the challenge by adding a computer engineering and sensor implementation aspect to the robotics lab.

  • (1) Line Tracking Kit
  • (1) Ultrasonic Range Finder
  • (1) Light Sensor
  • (2) Optical Shaft Encoder
  • (2) Potentiometer

P/N: 275-1179
In Stock
Integrated Encoder Modules
Integrated Encoder Modules are designed to provide you with direct and detailed information from your robot's motors. Simply replace the plastic cap on your motor and install the encoder. You can then be told which direction your motor is moving, how fast, and its distance traveled.

Starting at: $29.99
In Stock
Motor Controller 29

The Motor Controller 29 goes between a 3-wire Motor Port on a VEX Microcontroller and a VEX 2-Wire Motor. It uses a standard PWM signal to provide motor control.

P/N: 276-2193
In Stock
Potentiometer (2-pack)

With the Potentiometer you can determine both position and direction of rotation.

  • Measure Angular Position
  • 250-Degrees of Adjustment
  • Adjustable mounting angle

P/N: 276-2216
In Stock
Optical Shaft Encoder (2-pack)

With the Quadrature Encoder's two output channels you can measure both the position and direction of rotation of a VEX shaft.

  • Calculate Shaft Speed
  • Calculate Distance Traveled
  • Increase Navigational Control

P/N: 276-2156
In Stock
Line Tracker

Program your robot to follow a black line over a white surface.

  • Navigate down a marked path
  • Use for light sensing
  • More autonomous function

P/N: 276-2154
In Stock
Bumper Switch (2-pack)

The Bumper switch works as a trigger that provides feedback to the Microcontroller as events "happen".

  • Rugged bumpers allows triggering by large impacts
  • Useful as a trigger in a variety of applications
  • Functionality is pre-programmed in the VEX Microcontroller

P/N: 276-2159
In Stock
Limit Switch (2-pack)

These switches are great for signaling when a robot arm has reached the top or bottom of its motion.

  • Bendable sheet metal switch "arm" is very versatile
  • Useful as a trigger in a variety of applications
  • Functionality is pre-programmed in the VEX ARM® Cortex®-based Microcontroller

P/N: 276-2174
In Stock

Turn night into day with this powerful 4-LED flashlight. It draws power directly from the VEX Controller. Switch it on, and see in the dark. Easy to mount up off your robot using the included threaded standoffs.

  • No Batteries Required
  • On/Off Switch Control
  • Receives Power from a VEX Motor Port

P/N: 276-2210
In Stock
Speaker Module

Use the VEX Speaker Module to output sounds from the VEX ARM® Cortex®-based Microcontroller

Note: Requires VEX programming software that is sold separately.

P/N: 276-1504
In Stock
Extension Cable Retaining Clip (10-pack)

Plastic clips used for holding two 2-wire and 3-wire cables together. Use these to help secure your robot's electrical connections.

P/N: 276-4128
In Stock
Jumper (5-pack)

Used to make changes to the default code. Plug these into the digital I/O port of the microcontroller.

  • An easy method to set programming options.
  • Sold in a 5 pack.
  • Bright Orange color is easy to see.

P/N: 276-1380
In Stock
Competition Cortex Wire Retaining Clips

These wire retaining clips are upgrades for the standard microcontroller clips and are designed to secure wires in a competitive robotics environment.

  • (3) clips included.
  • Zip-tie wires into place to ensure secure connections.
  • Zip-ties not included.

P/N: 276-2173
In Stock
Programming Control Starter Kit

Includes everything you need to build an autonomous only robot.

  • (1) Clawbot Robot Kit
  • (1) VEX ARM® Cortex®-based Microcontroller
  • (6) Types of Sensors

P/N: 276-2750
Ships in 4 Weeks
easyC V4 for Cortex (3-options)

easyC® robotic programming software sets the standard for ease of use without sacrificing power. easyC features a revolutionary user-friendly drag-and-drop programming interface, an integrated compiler, and free tutorials and sample files.

  • Customizable, industry standard, tabbed interface
  • New integrated ANSI - C Compiler with loader
  • Full C text editor for advanced, customized programming
  • Enhanced Online window to manually test motors and sensors
  • Download to the robot wirelessly over VEXnet or directly using USB

Starting at: $74.99
Out of Stock
Robot AA Battery Holder

A Battery Holder for the VEX Microcontroller.

  • Holds 6 AA batteries
  • Works with Alkaline or rechargeable batteries

Discontinued. Available while supplies last.

P/N: 276-2036
Power Expander

Use the VEX Power Expander to add a secondary power source for four of the PWM outputs on the VEX Microcontroller.

  • Attach a 2nd battery to your robot
  • Power up to four (4) Motors or Servos
  • Reduce motor load on primary battery
  • Run your robot for longer!

P/N: 276-2271
In Stock
Smart Charger w/Optional Power Cord

The VEX Smart Charger is capable of charging ALL VEX rechargeable power packs.

  • Charges both 7.2V and 9.6V batteries
  • Charges both NiCd and NiMH batteries
  • Includes dual charge rates and an automatic shutoff
  • (4) Regional Power Cord Options

Discontinued. The Smart Charger v2 (276-2519) has replaced the Smart Charger.

PIC Microcontroller V0.5

The VEX Microcontroller coordinates the flow of information and power on the robot. All other electronics must interface to the Microcontroller.

  • Wireless with the 75MHz receiver and transmitter
  • Microchip processor
  • (8) Motor ports, (22) I/O Ports, (1) Serial Port
  • Programmable with easyC, ROBOTC, or MPLAB

Discontinued. Available while supplies last.

P/N: 276-2170
75 MHz Accessories
The VEX 75 MHz Control System is the old system used to control robots. Robots were controlled by a radio link, and controllers could be tethered to one another to allow for a second driver.
This system is no longer legal in the VEX Robotics Competition.

Starting at: $19.99
Out of Stock
Tools & Safety
VEX EDR offers a wide variety of tools and equipment to make your building experience easier and more time efficient. A single VEX EDR wrench, and one of each size allen wrench is all you will need.

Starting at: $2.99
In Stock
VEX Branded Merchandise

The VEX Merchandise Store is the one and only place to purchase VEX branded apparel and accessories online. With more than 200 unique products already available, there is sure to be an appealing product for everybody. Be sure to check back often, as new products will be added periodically!

VEX STEM Posters (4-pack)

Add some VEX-inspired art to your STEM classroom with four exclusive posters! Featuring iconic VEX EDR and VEX IQ elements, these unique posters are the perfect complement to any VEX lab or classroom.

  • 19" x 27" (48.3cm x 68.6cm)
  • Folds down to A4 paper size
  • Matte finish with gloss highlights

P/N: 276-5319
In Stock
Zip Ties

Smaller black Zip Ties are used to hold together and manage cables, band rubber chords, or attach to rollers or tank tread to assist an intake mechanism. 1/10" wide x 4" long with a rating of 18lbs.

Larger black Zip Ties are used to tie larger objects like a pneumatic cylinder to metal or attach to rollers to assist an intake. 11 inches long with a rating of 30lbs.

In Stock
Rubber Bands

VEX Synthetic Rubber Bands have dozens of uses on a robot. The spring like properties make them perfect for latches, triggers, and return mechanisms.

  • #32 Rubber Bands
  • 3" x 1/8" (76mm x 3mm)

  • #64 Rubber Bands
  • 3.5" x 1/4" (89mm x 6mm)

Starting at: $1.49
In Stock
VELCRO® Brand ONE-WRAP® (5')

VELCRO® brand ONE-WRAP® can be used to attach a light weight object. This Wrap comes with Hook on one side and Loop on the other so that it attaches back to itself for a secure closure.

  • Attach a light weight object.
  • Hook on one side and Loop on the other.
  • Attaches back to itself.

P/N: 275-1259
In Stock
VELCRO® Brand Adhesive Strip (5')

This adhesive VELCRO® Brand product has an adhesive backing so it can be attached directly to metal to hold a light weight object like a battery, create a trap door, or build a detachable part.

  • Adhesive backing.
  • Attach a light object like a battery.
  • Build a trap door or a detachable part.

P/N: 275-1257
In Stock
Adhesive Foam

Applications include robot bumpers, vibration isolation, accumulator backing, and any other applications requiring compression

  • 1" wide x 0.250" thick
  • Adhesive backed.

P/N: 275-1254
In Stock
Anti-Slip Mat (2-types)

These high friction mats are cuttable and compressible. Use for adding grip, friction, or padding.

  • Available in two types, thin or thick.
  • Size is 12" x 15"

Starting at: $2.50
In Stock
License Plate Alphabet Sticker Sheet

Spare License Plate Alphabet sticker sheet.

  • Replacement letter sheet for VEX U
  • Can be used to create custom messages
  • Comes with one sticker sheet per order

P/N: 276-3937
In Stock
VRC Competition Trophies & Award Plates

Need to buy extra trophies for your teammates, schools or sponsors? We've got 10" and 12" trophies available for all of the standard VRC awards given out at tournaments.

  • Official VEX Trophies
  • Trophy Plates with a variety of awards

Starting at: $4.00
In Stock
VRC License Plate Kit

License plates and identification numbers for teams competing in the VEX Robotics Competition.

  • Red & blue colors serve as alliance indicators as well as ID plates
  • Attaches using standard VEX EDR screws and nuts or VEX IQ pins
  • Plates come blank and are fully customizable

P/N: 276-3938
In Stock
VRC Starstruck - Full Game Object & Field Element Kit

All the Field Elements & Game Objects for use with VEX Robotics Competition Starstruck. One Full Field Set. Field Perimeter & Tiles NOT included.

In Stock
VRC Starstruck - Field Element Kit

All of the Field Elements for use with VEX Robotics Competition Starstruck. One Full Field Set. Game Pieces, Field Perimeter & Tiles NOT included.

P/N: 276-4897
In Stock
VRC Starstruck - Game Element Kit

Game Elements for use with VEX Robotics Competition Starstruck. This includes (1/4) of a Field Set. Field Perimeter & Tiles NOT included.

  • (7) Stars
  • (1) Cube

P/N: 276-4848
In Stock
In Stock
Field Perimeter Rubber Foot (20-pack)
Give your field a leg up. These rubber feet are distributed along the bottom edges of a VEX EDR field perimeter, thereby raising it to the same height as the field tiles. No more cutting tiles!

P/N: 276-5156
In Stock
VEXnet Competition Switch
Use the VEXnet Competition Switch to enable/disable up to four (4) VEXnet robots. This switch also has the ability to toggle between autonomous & operator control mode. Use this kit to simulate a VEX field controller for match practice!

  • (1) Four-way competition switch.
  • (1) 5' Ethernet cables

P/N: 276-2335
In Stock
VEXnet Field Controller Kit
A full set of controllers and cables for use with the VEXnet system and/or the VEX 75MHz Crystal Radios. Field control allows for accurate starting of competition matches.

P/N: 275-1401
In Stock
VEX Competition Field Monitor Stand
Competition Field Monitor Stand

P/N: 276-1572
In Stock
Swept Away Classroom Bundle

This discounted, turn-key "super bundle" allows you to implement a STEM program into your class in one easy step. It includes everything you need to build six robots and the Swept Away field and game object set - $300 in savings!

P/N: 278-3333
Ships 6 Weeks from Order
Programming Hardware Kit

The Programming Hardware Kit provides a connection between your PC and a VEX microcontroller. When used with the VEX ARM® Cortex®-based Microcontroller, the programming cable allows the user to monitor sensor values, perform live debugging of the code, and execute wireless downloads between the microcontroller & PC. This kit is required to program the VEX PIC Microcontroller.

  • (1) Programming Module
  • (1) USB A-A Cable 6 ft.
  • (1) RJ12 6-pin cable 3 ft.

P/N: 276-2186
In Stock
On Field Robot Sizing Tool

The On Field Robot Sizing Tool is designed to quickly inspect whether or not a VEX Robotics Competition Robot fits into the 18" maximum sizing dimension. This sizing bracket does not require the robot to be sitting on a baseplate, and can be used to measure a robot on any surface.

P/N: 276-2086
In Stock
Light Sensor

The Light Sensor uses a photocell that allows your robot to detect and react to light.

  • Analog input of light levels
  • Usable range of 0 to 6 feet
  • Find dark or bright areas

P/N: 276-2158
In Stock
LED Indicator Pack

Compatible with VEX ARM® Cortex®-based Microcontroller Digital Outputs. Use these for feedback indicators, to debug code, or for cool light patterns.

  • (3) Red LED Indicators
  • (3) Green LED Indicators
  • (2) Yellow LED Indicators

P/N: 276-2176
In Stock
LCD Display

Use the VEX LCD Display to recieve real-time feedback from your robot to perform live debugging. View multiple stored program configurations and select between them or provide additional user-input to your robot.

Note: Requires VEX programming software sold separately.

P/N: 276-2273
In Stock
Dual Control Starter Kit

Includes everything you need to build a programmable and joystick-controlled robot.

  • (1) Clawbot Robot Kit
  • (1) VEX ARM® Cortex®-based Microcontroller
  • (1) VEXnet Joystick

P/N: 276-2700
Ships 6 Weeks from Order
Competition Field Corner Bracket (4-pack)
These brackets replace the "bottom" plate that joins the corners of the Competition Field Perimeter Kit.

P/N: 276-4604
In Stock
Competition Field Perimeter Kit

The official VEX Robotics Competition Field is setup on a foam surface, with a sheet-metal and lexan perimeter frame.

  • Metal frame structure for the VEX Robotics Competition field perimeter.
  • Includes ALL parts required for frame assembly. (includes lexan)
  • Does NOT include Floor Tiles or Electronics.

This kit has a 2 week lead time for shipping.

P/N: 278-1501
Ships in 4 Weeks
Competition Field Tile Kit

VRC Foam Field Surface. Kit comes with enough 2' x 2' interlocking foam tiles to fill one standard sized VEX Robotics Competition field.

  • (36) Grey Tiles
  • (2) Red Tiles
  • (2) Blue Tiles

P/N: 278-1502
In Stock
Classroom & Competition Mechatronics Kit

VEX Classroom & Competition Kits include everything you need to design, build, power and operate robots.

The Classroom and Competition Mechatronics Kit provides for a focus on mechanical functions and advanced mechanisms using our most popular mechanical and structure equipment.

P/N: 276-2800
Ships 6 Weeks from Order
Classroom & Competition Programming Kit

VEX Classroom & Competition Kits include everything you need to design, build, power and operate robots.

The Classroom and Competition Programming Kit allows for a focus on computer science and autonomous programming by including advanced sensors.

P/N: 276-2900
Ships 6 Weeks from Order
Classroom & Competition Super Kit

VEX Classroom & Competition Kits include everything you need to design, build, power and operate robots.

The Classroom and Competition Super Kit combines both the Mechatronics and Programming Add-On Kits for the ultimate robotics learning and building experience.

P/N: 276-3000
Ships 6 Weeks from Order
Build a Field
Build your own bundle! Buy a field perimeter then choose the components you need.

Fields and game objects can have up to a 4 week lead time for shipping. Plan ahead when ordering for your event!

Availability Varies
Analog Accelerometer V1.0

By measuring the acceleration of the robot, one can calculate the velocity of the robot, and more importantly the distance this robot has travelled.

  • Three Axis Accelerometer
  • Selectable sensitivity via jumper: ±2g and ±6g
  • LED indicated power and proper connection

P/N: 276-2332
In Stock
Yaw Rate Gyroscope Sensor V1.0

Use a gyro to enhance autonomous movement and feedback from a VEX robot.

  • Single-axis gyroscopic sensor
  • Detects a rotation of up to + / - 1000 degrees per second
  • Connects to analog inputs on VEX microcontrollers

P/N: 276-2333
In Stock
Ultrasonic Range Finder

Avoid obstacles and measure distances with the ultrasonic range finder. Device emits a high-frequency sound wave that alerts the robot to things in its path.

  • Measure distances from 1.5in to 115in
  • Detect obstacles using high frequency sound waves

P/N: 276-2155
In Stock
VRC Nothing But Net - Full Game Object & Goal Kit

All the Field Elements & Game Objects for use with VEX Robotics Competition Nothing But Net. One Full Field Set. Field Perimeter & Tiles NOT included.

  • (100) Balls
  • (12) Bonus Balls
  • (4) Mesh Bag with drawstring
  • (2) 2015 - 2016 Low Goal Pipes & (4) Mounting Brackets
  • (1) Competition Field Corner Bracket (4-pack)
  • (4) VRC License Plate Packs
  • (1) Tie Wraps 11" (100-pack)
  • (1) Roll 3/4" Wide White Tape
  • (1) Roll 2" Wide Blue Tape
  • (1) Roll 2" Wide Red Tape
  • (1) Red High Goal
  • (1) Blue High Goal
  • All Necessary Assembly Hardware

P/N: 276-4162
In Stock
VRC Nothing But Net - Ball Kit
Spare Balls for teams who want to practice VEX Robotics Competition Nothing But Net
  • (25) Ball
  • (3) Bonus Ball
  • (1) Mesh Bag

P/N: 276-4257
In Stock
P/N: 276-4365
In Stock
VRC Nothing But Net - Spare Corner Connector Kit

Spare corner connectors for the High Goal in the 2015-2016 VEX Robotics Competition game, VRC Nothing But Net. Contains all connectors needed to build one High Goal.

P/N: 276-4656
107 Item(s) Show per page
View as: List  Photos  Sort by Set Descending Direction