Cart / Quote
$USD

Build A Field

As low as $0.00
In stock
Compatible with products and accessories.
VRC, VEX U, VAIC legal.

Build your own VRC Field bundle! Choose your field perimeter, then any additional components you'll need.

Look in the description tab below for more information on each product that can be found on this page.

Field tiles and electronics are not included with the Field Perimeters unless added separately.

 

Note: Field Perimeters and Game Objects can have up to a 4 week lead time for shipping. Per our Order Policies, we do not offer partial shipping for orders containing backordered items. If you require in-stock items urgently, we recommend placing a separate order for the backordered items.

VEX Portable Competition Field Perimeter
Legacy Field Perimeter

An all new and improved VRC Field Perimeter! Assembles in minutes with a simple snap-together construction.

Notable improvements from the original VRC Field Perimeter include:

  • Weight has been cut nearly in half
  • GPS Field Code is printed directly onto the walls to to outfit your field with VEX GPS
  • Can be assembled by a single person in approximately 15 minutes
  • Includes carrying cases for easy transportation of Field Perimeter

Note: Field tiles and electronics are not included with the Portable Competition Field Perimeter unless added separately.

The official VEX Robotics Competition Field is setup on a foam surface, with a sheet-metal and polycarbonate perimeter frame. Inside this perimeter, game-specific elements can be added.

  • Metal frame for the VEX Robotics Competition field perimeter
  • Includes ALL parts required for frame assembly (includes polycarbonate)
  • Also Includes two driver-control posts
  • Modular and designed for easy assembly, disassembly, storage

Note: Field tiles and electronics are not included with the Portable Competition Field Perimeter unless added separately.

Interlocking 2' x 2' Foam Tiles used to construct a VEX Robotics Competition field. These tiles are resistant to Electrostatic Discharge. 36 Tiles are required for a standard VRC Field. 

Note: NOT compatible with pre-existing foam field tiles (278-1502).

Everything you need to build a complete VRC Tipping Point field. One Full Field & Game Element Kit (276-7048) includes the following:

  • (1) VRC Tipping Point Game Element Kit (276-7049)

  • (1) VRC Tipping Point Field Element Kit 1 (276-7051)

  • (1) VRC Tipping Point Field Element Kit 2 (276-7052)

VRC Tipping Point Game Element Kit
(276-7049)

VRC Tipping Point Field Element Kit 1
(276-7051)

VRC Tipping Point Field Element Kit 2
(276-7052)

GPS Field Code Strip Set V2 (276-7823) - Everything needed to outfit your VRC Field Perimeter with VEX GPS Field Code. Contains all needed Code Strips and Hook & Loop Adhesive for attachment.

Note: Not required if purchasing the Portable Field Perimeter.


VEXnet Field Controller Kit (275-1401) - A full set of controllers and cables for use with the VEXnet system and/or the VEX 75MHz Crystal Radios to enable consistent and fair competition match timing.

  • (1) Match Controllers
  • (2) Driver Interfaces
  • (1) USB A-B Cable
  • (2) 50' Ethernet Cables
  • (4) 5' Ethernet Cables

VEX Competition Field Monitor Stand (276-1572) - This bracket allows you to mount an LCD monitor onto the VEX field perimeter, either on a corner or at the center of a wall panel. Monitor mounting hardware is included.

VEX Portable Competition Field Perimeter (276-8242)

  • (16) Field Connector - T Assembly
  • (8) Field Connector - Corner Assembly
  • (2) Strap Connector
  • (4) Field Extrusion Bottom 1 - Left
  • (4) Field Extrusion Bottom 2 - Middle
  • (4) Field Extrusion Bottom 3 -Right
  • (8) Field Extrusion - Vertical Center
  • (4) Field Extrusion - Vertical Corner
  • (8) Plastic Sheet - Side
  • (4) Plastic Sheet - Middle
  • (1) GPS Code Extrustion Set
  • (1) Field Tile Case

Legacy Field Perimeter (278-1501)

  • (24) Sheet-Metal Horizontal Field Component
  • (24) Sheet-Metal Vertical Field Component
  • (12) Clear Lexan Wall Panel - 8" x 46" x 1/8"
  • (16) Sheet-Metal Wall Assembly Gusset
  • (4) Sheet-Metal Corner Assembly Gusset
  • (4) Competition Field Corner Bracket
  • (20) Field Perimeter Rubber Feet
  • (2) Sheet-Metal Driver Station Post
  • (2) Sheet-Metal Driver Station Attachment Bracket
  • (2) Sheet-Metal Driver Station Base Plate
  • (118) 1/4-20 x 1/2" Long Button Head Hex Screw
  • (52) 1/4-20 Nylock Nut
  • (8) 10-32 x 1/2" Long Flat Head Phillips Screw
  • (8) 10-32 Nylock Nut

VRC Anti-Static Full Field Tile Kit (276-7175)

  • (36) Anti-Static Field Tiles

VRC Anti-Static Field Tiles (18-pack) (276-6905)

  • (18) Anti-Static Field Tiles

VRC Anti-Static Field Tiles (4-pack) (276-6904)

  • (4) Anti-Static Field Tiles


VRC Tipping Point Full Field & Game Element Kit (276-7048
)

  • (1) VRC Tipping Point Game Element Kit
  • (1) VRC Tipping Point Field Element Kit 1
  • (1) VRC Tipping Point Field Element Kit 2


GPS Field Code Stript Set V2 (276-7823)

  • GPS Field Code Strip v2 (4-pack) (276-8104)
  • Hook & Loop Adhesive Strip (5') (275-1257)

VEXnet Field Controller Kit (275-1401)

  • (1) Match Controllers
  • (2) Driver Interfaces
  • (1) USB A-B Cable
  • (2) 50' Ethernet Cables
  • (4) 5' Ethernet Cables

VEX Competition Field Monitor Stand (276-1572)

  • (1) VEX Competition Field Monitor Stand
  • (1) Set of Standardized VESA Monitor Mounting Hardware