Programming Control Starter Kit
$449.00
Discontinued
SKU
276-2750
Build a programmable starter robot!
The Programming Control Starter Kit allows you to build an autonomous only robot using the included programmable VEX ARM® Cortex®-based Microcontroller and various sensor types.
Starter Kit includes:
- Clawbot Robot Kit (4 motors included)
- VEX ARM® Cortex®-based Microcontroller
- Robot Battery NiMH 3000mAh and Charger
- Limit Switch Kit
- Bumper Switch Kit
- Potentiometer (2-pack)
- Ultrasonic Range Finder
- Line Tracker
Discontinued. This Kit has been replaced with 276-7510.
CAD File |
---|
Motion
- (3) 2-Wire Motor 393
- (21) Shaft Collar
- (4) Shaft Coupler
- (8) Shaft, 3" Long
- (18) Bearing Flat
- (2) Spur Gear, 12-tooth
- (6) Spur Gear, 60-tooth
- (2) Spur Gear, 84-tooth
- (4) 4" Wheel
- (1) Claw Kit Assembly (includes motor)
Structure
- (2) Bar, 20-hole
- (2) Chassis Bumper (20-hole)
- (4) Chassis Rail (16-hole)
- (2) C-Channel, 1x2x1x15 hole
- (1) C-Channel, 1x2x1x20 hole
Electrical
- (1) 7.2V Robot Battery NiMH 3000mAh
- (1) Smart Charger & Power Cord
- (2) Motor Controller 29
- (1) Battery Strap (2-pack)
Electronics
Sensors
- (1) Bumper Switch (2-pack)
- (1) Limit Switch (2-pack)
- (1) Potentiometer (2-pack)
- (1) Line Tracker Kit
- (1) Ultrasonic Range Finder
Hardware
- (32) Screw, 8-32 x 1/4" Long
- (14) Screw, 8-32 x 1/2" Long
- (3) Screw, 8-32 x 1 1/2" Long
- (6) Locking Screw, 6-32 x 1/4" Long
- (6) Locking Screw, 6-32 x 1/2" Long
- (42) Nut, 8-32 Keps
- (6) Shaft Spacer, Thin (4.6mm)
- (50) 4" Zip Ties
- (32) Bearing Attachment Rivet
Equipment
- (2) Tool, Hex Key (5/64")
- (2) Tool, Hex Key (3/32")
- (2) Tool, VEX Open-Ended Wrench
- (1) Quick Start Guide, Clawbot
The VEX ARM® Cortex®-based Microcontroller is pre-programmed with default firmware that allows for basic robot control via the VEXnet Joystick. Programming software is required for customization of robot control, autonomous programming, integration of sensors and more.