- Vision Sensor was added to your shopping cart.
- VEXnet System Bundle was added to your shopping cart.
- VEXnet Key 2.0 was added to your shopping cart.
- VEXnet Joystick Power Adapter was added to your shopping cart.
- VEXnet Backup Battery Holder was added to your shopping cart.
- VEX ARM® Cortex®-based Microcontroller was added to your shopping cart.
- V5 System Bundle was added to your shopping cart.
- V5 Robot Radio was added to your shopping cart.
- V5 Robot Brain was added to your shopping cart.
- V5 Robot Battery Li-Ion 1100mAh was added to your shopping cart.
- V5 Power Cable Assortment was added to your shopping cart.
- V5 Inertial Sensor was added to your shopping cart.
- V5 Controller was added to your shopping cart.
- V5 Battery Clip (4-Pack) was added to your shopping cart.
- USB A-A Tether Cable 6' was added to your shopping cart.
- Ultrasonic Range Finder was added to your shopping cart.
- Programming Hardware Kit was added to your shopping cart.
- Power Expander was added to your shopping cart.
- Potentiometer (2-pack) was added to your shopping cart.
- Optical Shaft Encoder (2-pack) was added to your shopping cart.
- Motor Controller 29 was added to your shopping cart.
- Line Tracker (3-pack) was added to your shopping cart.
- Limit Switch (2-pack) was added to your shopping cart.
- Light Sensor was added to your shopping cart.
- LED Indicator Pack was added to your shopping cart.
- Jumper (5-pack) was added to your shopping cart.
- Flashlight was added to your shopping cart.
- Extension Cable Retaining Clip (10-pack) was added to your shopping cart.
- Competition Cortex Wire Retaining Clips was added to your shopping cart.
- Coiled Handset Cable was added to your shopping cart.
- Bumper Switch v2 (2-Pack) was added to your shopping cart.
- Bumper Switch (2-pack) was added to your shopping cart.
- Battery Strap (2-pack) was added to your shopping cart.
- Battery Extension Cable was added to your shopping cart.
- Battery Clip (4-pack) was added to your shopping cart.
- Analog Accelerometer V1.0 was added to your shopping cart.
- Advanced Sensor Kit was added to your shopping cart.

75 MHz Accessories

Name: 75 MHz Accessories
Brand: VEX Robotics
SKU: 75mhz
Price: 19.99 USD
Availability: InStock

75 MHz Transmitter & Receiver - (276-2153)

More Views

75 MHz Accessories

The VEX 75 MHz Control System is the former competition control system. Robots are controlled by a transmitter with different radio frequency crystals. Controllers can be tethered to one another to allow for a second driver.
This system is no longer legal in the VEX Robotics Competition. We recommend the current VEXnet control system.

Availability: Out of stock

Product Name	Availability	Price	Qty
75 MHz Signal Splitter 276-2217	Discontinued	$19.99

Description

This kit includes a VEX EDR 75 Mhz Transmitter and Receiver. It provides the radio control link which allows human operators direct control of a VEX EDR robot. Transmitter is a 6-channel (4-analog, 2-digital) hobby grade FM unit, custom configured for VEX.

6 Input Channels (4-analog, 2-digital).
75Mhz, multi-frequency via RF crystals. 10 Channels.
Two transmitters can connect to one robot.
Multi-configuration with digital trim and channel mixing.
Includes robot tether port.

Discontinued. Available while supplies last.

This Signal Splitter can be used to drive up to (6) PWM devices, including VEX EDR 2-Wire Motors with a Motor Controller 29 & VEX Servos. Since this device is capable of directly taking the signal output from the VEX EDR Receiver Module and driving motors, it is possible to build robots without a VEX Microcontroller.

No Programming Needed
Up to (6) Motors or Servos
Uses standard VEX EDR 7.2V Batteries

Discontinued.

Kit Contents

75 MHz Transmitter & Receiver (276-2153)

(1) Transmitter unit

(1) Transmitter frequency module - channel 89

(1) RF receiver module

(1) Receiver crystal - channel 89

(1) Receiver antenna sleeve

(1) Receiver antenna sleeve holder

(5) Keps nuts

(5) 8-32 x 3/8" Screws

(1) Inventor's Guide Insert

(1) 9" RJ-10 cable to Microcontroller

75 MHz Signal Splitter (276-2217)

(1) Signal Splitter

(1) Instruction Sheet

Docs & Downloads

75MHz Transmitter Control Guide

CAD File

CAD File (STEP)

Weight

75 MHz Transmitter & Receiver (276-2153)

Transmitter: 1.63 lbs

Receiver: 0.05 lbs

75 MHz Signal Splitter (276-2217)

0.14 lbs

Compatibility

75 MHz Transmitter & Receiver (276-2153)

Compatible with 75 MHz Crystals

75 MHz Signal Splitter (276-2217)

Compatible with 75 MHz RF Receiver Module and 75 MHz Transmitter

Other Info

75 MHz Transmitter & Receiver (276-2153) Frequencies:

Channel 89, 75.970 MHz

User Inputs:

6 Channels (4 Analog and 2 Digital)

Analog Channels = 2 potentiometers, each with an X and Y axis.

Digital Channels = 4 momentary switches (located on the backside)

Batteries:

8 AA batteries (not included)

Compatible with the 9.6V Battery and Smart Charger

75 MHz Signal Splitter (276-2217) User Inputs:

VEX Receiver Output, must be used with the VEX Transmitter and Receiver

Ports:

(1) Power Input Port

(6) VEX Motor Controller 29 or Servos

Batteries:

7.2V batteries

United States

Canada

United Kingdom

Europe

Australia

Asia / Pacific

75 MHz Accessories

More Views

Details

United States

Canada

United Kingdom

Europe

Australia

Asia / Pacific

75 MHz Accessories

More Views

Details

video title