Connecting the Yaw Rate Gyroscope
Connect the Yaw Rate Gyro to an analog input on the VEX Microcontroller using a standard servo extension cable. The black (ground) wire goes adjacent to the 'B' silkscreened on the board. The center wire is for +5 volts. The white wire is signal. The mounting holes are electrically isolated from the circuit.
- Kit Contents
- (1) Yaw Rate Gyroscope Sensor V1.0
- Docs & Downloads
- Measures rotational rate in degrees per second (dps) and outputs a proportional analog value.
- CAD Files