Ships by September 27th
The ideal kit for expanding a VEX IQ collection. Allows for creation of supplemental robot mechanisms and teaching of additional lessons.
- Contains over 1,000 VEX IQ components
- Structural and motion components included
- Includes Storage Bin and Tray
Ships in 8 Weeks
The best VEX IQ expansion bundle for competitive teams. Complements a Super Kit with the advanced motion components needed to gain a competitive edge.
- Omni-Directional Wheels allow for complex drives
- Chain & Sprocket Kit helps create more elaborate mechanisms
- Over 8 feet of tank tread and chain
Four different size tire diameters and two different size wheel hubs. Tire size is printed on tires for easy reference.
- (6) Small Wheel Hub
- (4) Large Wheel Hub
- (4) 10mm Diameter Pulleys
- (4) 100mm Travel Rubber Tire
- (4) 160mm Travel Rubber Tire
- (4) 200mm Travel Rubber Tire
- (4) 250mm Travel Rubber Tire
Omni-Directional wheels roll forward like normal wheels, but slide sideways with almost no friction (no skidding during turns). Use these wheels to make your robot turn smoothly or build a holonomic drivetrain.
- Omni-Directional Wheels roll sideways with very little friction
- Minimize skidding during turns
This kit contains rack gears, worm gears, linear slide brackets and VEX IQ gears in assorted tooth counts and sizes!
- (10) 12 Tooth Gear
- (10) 36 Tooth Gear
- (6) 60 Tooth Gear
- (4) 36 Tooth Crown Gear
- (8) Rack Gear
- (4) Linear Slide Bracket
- (2) Worm Gear
- (6) Worm Gear Bracket
Starting at: $9.99
This kit has motion components for creation of advanced mechanisms. Transfer motion 90-degrees "around corners" using bevel gears, or add a differential to your drivetrain. Includes structural elements to enable your build!
- (9) 0x2 Idler Pins
- (9) 1x2 Idler Pins
- (20) 18-tooth Bevel Gears
- (2) Differential Gears
- (8) Double 2x Wide, 2x2 Double Offset Corner Connectors
Starting at: $12.99
Use chains and sprockets for additional reductions and to drive mechanisms.
- (200) Chain Link
- (8) 8 Tooth Sprocket
- (8) 16 Tooth Sprocket
- (4) 24 Tooth Sprocket
- (4) 32 Tooth Sprocket
- (4) 40 Tooth Sprocket
Chain Add-on Pack contains (200) additional chain links for longer chain runs and more complex mechanisms.
Starting at: $24.99
Tank tread can be used to easily drive over objects or scoop up objects. Use this kit to create intake mechanisms, tank tread drivetrains and more!
- (200) Tread / Attachment Link
- (4) 24 Tooth Sprocket
- (40) Traction Link
- (20) Short Intake Flap
- (20) Medium Intake Flap
- (20) Long Intake Flap
Starting at: $9.99The Planetary Gear & XL Turntable pack provides two options for low friction, high load rotational joints. These are especially well suited for rotational joints with lots of side load - this kit makes it easy to build a turret on your robot!
- (20) 0x2 Idler Pins
- (10) 0x3 Idler Pins
- (10) 1x2 Idler Pins
- (20) Washers
- (6) 3x3 Plus Gusset Beams
- (12) XL Turntable Outer Housings
- (4) XL Turntable Plain Bushings
- (4) XL Turntable 36 Tooth Ring Gear Bushings
- (20) 12 Tooth Gears
This kit contains 14 "long length" shafts to enable construction of even larger VEX IQ robots. Transfer motion over long distances with ease.
- (2) 9x Pitch Shaft
- (2) 10x Pitch Shaft
- (2) 11x Pitch Shaft
- (2) 12x Pitch Shaft
- (1) 14x Pitch Shaft
- (1) 16x Pitch Shaft
- (1) 18x Pitch Shaft
- (1) 20x Pitch Shaft
- (1) 22x Pitch Shaft
- (1) 24x Pitch Shaft
Starting at: $7.99
The Plastic Shaft Base Pack contains various length shafts for different purposes and pitches your design may require. This pack is included in all VEX IQ Starter Kits and Super Kits.
- (6) 1x1 Idler Pin
- (6) 0x2 Idler Pin
- (2) 2x Pitch Plastic Shaft
- (2) 3x Pitch Plastic Shaft
- (2) 4x Pitch Plastic Shaft
- (2) 5x Pitch Plastic Shaft
- (2) 2x Pitch Plastic Motor Shaft
- (4) 3x Pitch Plastic Motor Shaft
- (2) 4x Pitch Plastic Motor Shaft
- (2) 2x Pitch Plastic Capped Shaft
- (4) 3x Pitch Plastic Capped Shaft
- (2) 4x Pitch Plastic Capped Shaft
- (2) 5x Pitch Plastic Capped Shaft
Starting at: $4.99
The Turntable Base Pack is included in the Foundation Add-On Kit. Ideal for building rotational joints.
- (3) Thrust Bearing Smooth Bushing
- (2) Large Thrust Bearing Smooth Bushing
- (6) Thrust Bearing Housing
- (4) Large Thrust Bearing Housing
Starting at: $4.99
This flexible U-joint accepts square drive shafts and can transfer motion between non-aligned shafts. Contains structural elements to ensure that you are ready to build!
- (10) Universal Joints
- (8) Double 1x Wide, 1x1 Corner Connectors
- (8) Double 1x Wide, 2x1 Corner Connectors
The Pulley Base Pack contains pulleys of different sizes and assorted rubber belt size, and is included in all VEX IQ Starter Kits and Super Kits.
- (2) 10mm Pulley
- (2) 20mm Pulley
- (2) 30mm Pulley
- (2) 40mm Pulley
- (2) 30mm Rubber Belt
- (2) 40mm Rubber Belt
- (2) 50mm Rubber Belt
- (2) 60mm Rubber Belt
- (2) Tire (100mm Travel)