Gears

Set Descending Direction

7 Item(s)

  1. Bearing Bore Gear

    Starting at: $14.99

    View Details

    Assortment of gears made from 7075-T6 with a teflon infused ceramic coating.

    • 1.125" bearing bores for dead axle applications
    • Includes VersaKey pattern for perfect piloting
    • Overall width 0.500"
  2. 100t Aluminum Spur Gear (32 DP, 3/8" Hex Bore) (217-5865)

    Starting at: $5.99

    View Details

    An assortment of gear types providing the maximum versatility of gearing options to users. These gears have a Diametral Pitch of 32, which allows for reductions in smaller areas. They are also pocketed for maximum weight savings. Great for lighter load applications and smaller robots!

    Note: These gears are NOT compatible with VEXpro 20 DP gears.

  3. 15T Steel Bevel Gear (12DP, 3/8" Hex Bore) (217-3344)

    Starting at: $14.99

    View Details

    The "standard" swerve drive bevel gear.


    • 15-tooth, 12-DP gear
    • Commonly used in FRC coaxial swerve drives
    • 4140 steel with black oxide for superior performance
  4. Gear With 3/8" Hex Bore

    Starting at: $6.99

    View Details

    Assortment of gears made from 7075-T6 with a teflon infused ceramic coating or 4140 Steel.

    • 3/8" hex bores for use on hex shafts
    • Made from 7075-T6 aluminum with a teflon infused ceramic coating or 4140 Steel with a black nitride finish
    • Overall width 0.500"
  5. Gear with 1/2" Hex Bore

    Starting at: $6.99

    View Details

    Assortment of gears made from 7075-T6 with a teflon infused ceramic coating.

    • 1/2" hex bores for use on hex shafts
    • 20DP with 14.5 degree pressure angle
    • Overall width 0.500"
  6. 12t CIM Motor Gear

    Starting at: $6.99

    View Details

    7075 T6 Aluminum and 4140 Steel gears reduce weight and rotational inertia of your gearbox. The VEXpro teflon infused ceramic coating greatly reduces the friction of your gearbox at the initial motor reduction (where drag has the most effect on the system).

    • Includes gear and mounting hardware
    • Mounts to a CIM Motor 8mm shaft
    • Mounts to other motors or gearbox using this similar shaft
  7. 60t Ball Shifter Gear

    Starting at: $12.99

    View Details

    Assortment of gears made from 7075-T6 with a teflon infused ceramic coating, with special bores for shifting gearboxes.


    • Ball Shifter gears include cutouts for the VEXpro Ball Shifter
    • Dog gears include cutouts for the WCP DS gearbox
    • 20 DP with 14.5 degree pressure angle
    • Overall width 0.500"

Set Descending Direction

7 Item(s)