Recently added item(s) ×

You have no items in your shopping cart.


Falcon 500

Set Descending Direction

6 Item(s)

  1. Falcon 500


    Out of Stock; Backorders temporarily delayed

    The Falcon 500, powered by Talon FX, is a Brushless Motor co-developed through a collaborative partnership between VEX Robotics and Cross the Road Electronics. This is the same partnership that brought the cutting edge Talon SRX and Victor SPX to the FIRST® Robotics Competition.

    It is designed to give teams previously unheard of amounts of power and efficiency, the Falcon 500 reduces size, weight, and common failure points of other motors in the market.

    Learn more here.

    Additional features include:

    • 400W Power @ 40A / 12VDC
    • Peak Efficiency of 87%
    • Integrated Talon FX Motor Controller
    • 14T Splined Output Shaft
    • Optional cooling port
    • 1.1 lbs, total weight
  2. Falcon Motor Spacer Pack


    Additional spacers to help position items on a Falcon 500 Motor's shaft. The spacing system is designed so that (1) of each spacer in this kit, in addition to any Falcon Motor pinion or pulley will equal the length of the shaft.

  3. Falcon 500 Long Shaft

    Starting at: $12.99

    View Details

    Replaceable shafts for the Falcon 500 motor. Use these to replace shafts that have been cut, bent or damaged. The Falcon Motor Short Shaft is specifically cut to the correct length needed to use the Falcon 500 with a VersaPlanetary Gearbox

  4. 12T Aluminum Spur Gear (20 DP, CIM Motor, With Mounting Hardware) 217-2614

    Starting at: $6.99

    View Details

    7075 T6 Aluminum and 4140 Steel pinions reduce weight and rotational inertia of your gearbox. The VEXpro teflon infused ceramic coating greatly reduces the friction of your gearbox at the initial motor reduction (where drag has the most effect on the system).

    20 DP Pinions will allow you to create the same exact reduction you’ve been creating with the VEXpro 32 DP gears but in a smaller, more compact space.

    VEXpro offers 20 DP gears specifically sized for some of the most popular motors in FRC, including the Falcon 500, CIM, BAG, RS550 and RS775.

    • 14.5 degree pressure angle
    • Mounts to various sized FRC motors
    • Mounts to other motors or gearboxes using a similar shaft
  5. 60t x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, 1/2" Hex Bore) (217-5876)

    Starting at: $13.99

    View Details

    Synchronous timing belts and pulleys are lighter and can be more efficient than chains and sprockets. Once set up, they require no tensioning or adjustment. These pulleys go hand in hand with GT2 timing belts, and are great for low-load applications.
  6. VersaPlanetary Press On Motor Coupler (Falcon 500)

    Starting at: $3.99

    View Details

    The VersaPlanetary Motor Coupler is designed to couple RS-775 or Falcon 500 Motors with the VersaPlanetary.

    The coupler slides right through the VersaPlanetary’s motor mounting plate. No more split rings, and no more setscrews to tighten or worry about loosening. The 775 version is a press-fit for the the RS-775 motor. The Falcon Motor version slides on to the Falcon motor's shaft.

Set Descending Direction

6 Item(s)